474442
12
Zoom out
Zoom in
Previous page
1/21
Next page
B. SAFETY PRECAUTIONS
Warning!
Read the instruction
manual carefully
Protective boots
Protective goggles or
visor, protective helmet
and hearing protection
Protective cut-proof
gloves
Protective long,
cut-proof trousers
Chain brake:
deactivated, activated
Remove plug from the
mains immediately if the
cable is damaged or cut
Keep bystanders away
Correct direction of the
cutting teeth.
Always grip the machine
with two hands
Kickback danger
Do not expose to rain or
moisture.
Chain oil
Refrain from
Turn the machine off
Disconnect the plug
before adjusting or
cleaning.
Risk of electric shock
MEANING OF SYMBOLS
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions.
Failure to follow the warnings
and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future
reference.
The term ʻ“power tool” in the warnings refers to your
mains-operated (corded) power tool .
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or
dark areas invite accidents.
b)Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools
create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause
you to lose control.
2)Electrical safety
a)Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adaptor plugs with earthed (grounded)
power tools.
Unmodified plugs and matching
outlets will reduce risk of electric shock.
b)Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of
electric shock if your body is earthed or grounded.
c)Do not expose power tools to rain or wet
conditions.
Water entering a power tool will
increase the risk electric shock.
d)Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords
increase the risk of electric shock.
e)When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use
of a cord suitable for outdoor use reduces the risk
of electric shock.
10 m
10 m
ENGLISH - 2
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena CSI 4020-X-8863 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena CSI 4020-X-8863 in the language / languages: English as an attachment in your email.

The manual is 7.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena CSI 4020-X-8863

Gardena CSI 4020-X-8863 User Manual - German - 21 pages

Gardena CSI 4020-X-8863 User Manual - Dutch - 21 pages

Gardena CSI 4020-X-8863 User Manual - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info