584686

Gardena ComfortCut Plus 500-27 - 9809 Manual

9
Zoom out
Zoom in
Previous page
1/15
Next page
7. Troubleshooting
DANGER!
Risk of injury from the cutting filament!
v Always unplug the mains plug of the Turbotrimmer
before troubleshooting.
Pulling the filament out
of the filament cassette:
h
g
gp
h
If a filament is drawn into the filament cassette you can pull it
out again as described below.
1. Remove the filament cassette g as described under
6. Maintenance “Replacing the filament cassette”.
2. Press together the plastic ring h on the filament cassette g
between your thumb and forefinger.
3. Draw the plastic ring h over the side part of the filament
cassette (use a screwdriver if necessary).
You can now access the filament that was drawn into the
filament cassette.
4. Unwind the cutting filament p by approx. 15 cm and thread it
through the eye of the plastic ring h. If necessary, loosen the
welded filament beforehand using a screwdriver, and unwind
and rewind completely.
5. Pull the plastic ring h back over the filament cassette g.
6. Reinstall the filament cassette g as described under
6. Maintenance “Replacing the filament cassette”.
Problem Possible Cause Remedy
The trimmer no longer cuts Filament worn or too short. v Lengthen the filament
(see 4. Operation “Filament
feed – Tip mechanism”).
Filament cassette empty. v Replace the filament cas sette
(see 6. Maintenance
“Replac ing the filament
cassette” ).
Filament drawn into the
cassette or stuck together.
v Pull the filament out of the
filament cassette (see above).
Filament cannot be
extended or filament
is consumed rapidly
The filament became too dry
and brittle (e. g. over the winter).
v Place the filament in water for
approx. 10 hours.
Frequent contact between the
filament and hard objects.
v Avoid contact between the
filament and hard objects.
For any other malfunctions please contact the GARDENA service department.
Repairs must only be carried out by GARDENA service departments or specialist
dealers authorised by GARDENA.
19
GB
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena ComfortCut Plus 500-27 - 9809 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena ComfortCut Plus 500-27 - 9809 in the language / languages: English as an attachment in your email.

The manual is 2,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena ComfortCut Plus 500-27 - 9809

Gardena ComfortCut Plus 500-27 - 9809 User Manual - German - 16 pages

Gardena ComfortCut Plus 500-27 - 9809 User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info