Manual Gardena ComfortCut 450-25 - 9808 (page 8 of 15) (English)

584685

Zoom out

Zoom in

1/15

Cleaning the trimmer:

The ventilation slots must always be free of dirt.

v Clean all moving parts after each use, and especially remove

any grass and dirt from the cover 0 and ventilation slots s.

Replacing the filament

cassette:

f f

Risk of injury!

v Never use metallic cutting elements or replacement

parts and accessories not provided by GARDENA.

Only use original GARDENA Filament Cassettes. You can

order Replacement Filament Cassettes from your GARDENA

dealer or directly from the GARDENA Customer Service.

• for Art. 9808 / 9809:

GARDENA Filament Cassette for Turbotrimmers Art. 5307

• for Art. 9811:

GARDENA Filament Cassette for Turbotrimmers Art. 5309

1. Press in cassette cover d on the two catches f at the same

time and remove.

2. Remove the filament cassette g.

3. Remove any dirt.

4. Pull approximately 15 cm of the cutting filament p out of the

new filament cassette g through the hole in the plastic ring h.

5. First thread the cutting filament p through the metal sleeve j.

6. For Art. 9808 / 9809 only: Thread the cutting filament p around

the guide pin k.

7. Insert the filament cassette g into the filament cassette

holder l.

8. Fit the cassette cover d on the filament cassette holder l

so that you hear both locking clips f click into place.

For Art. 9808 / 9809 only: When fitting the cassette cover d,

the cutting filament p must be placed around the guide pin k

and must not be trapped.

v If the cassette cover d cannot be touched down, turn the

filament cassette g to and fro, until the filament cassette g

is completely in the filament cassette holder l.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gardena ComfortCut 450-25 - 9808 in the language / languages: English as an attachment in your email.

The manual is 2,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena ComfortCut 450-25 - 9808

Gardena ComfortCut 450-25 - 9808 User Manual - German - 16 pages

Gardena ComfortCut 450-25 - 9808 User Manual - Dutch - 15 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gardena ComfortCut 450-25 - 9808 Manual

Product: