584685
4
Zoom out
Zoom in
Previous page
1/15
Next page
3. Assembly
Assembling the trimmer:
1
ß
R
2
4
3
7
8
9
6
5
CAUTION!
The trimmer may only be operated provided that the
protective cover 0 is assembled.
1. Pull the lock 1 belonging to the
additional handle 2, push in both
of the snap-fits 3 belonging to the
additional handle 2 and, with the
grooves ß
R
pointing forwards, snap
them into the holder 4.
2. Place both halves of the impeller 5
around the lower groove 6 of the
trimmer head 7 and close until
they audibly engage.
3. From the front, push the plant
guard 8 into the upper groove 9
of the trimmer head 7. In doing
so, ensure that the installed bow
can rotate freely (i. e. insert the
bow with the kink pointing
upwards).
4. Place the protective cover 0 on
top of the trimmer head 7.
5. Turn the protective cover 0 until it
can be pushed over the trimmer
head entirely (the two arrows ß
A1
, ß
A2
are directly across from each
other).
6. Rotate the protective cover 0 anti-
clockwise until it audibly engages.
0
A1
ßß
A2
Supply lines must be lighter than:
common rubber lines (H 05 RNF),
if rubber-insulated;
common PVC-coated lines (H 05 WF),
if insulated with PVC.
Only connect the device to a mains circuit which
is equipped with a residual current device (RCD)
with a maximum release current of 30 mA.
In Switzerland the use of a residual-current
device is obligatory.
Warning! This machine produces an electro-
magnetical field during operation. This field may
under some circumstances interfere with active
or passive medical implants. To reduce the risk
of serious or fatal injury, we recommend persons
with medical implants to consult their physician
and the medical implant manu facturer before
operating this machine. Do not use the product
when a thunderstorm is approaching.
14
GB
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena ComfortCut 450-25 - 9808 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena ComfortCut 450-25 - 9808 in the language / languages: English as an attachment in your email.

The manual is 2,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena ComfortCut 450-25 - 9808

Gardena ComfortCut 450-25 - 9808 User Manual - German - 16 pages

Gardena ComfortCut 450-25 - 9808 User Manual - German - 16 pages

Gardena ComfortCut 450-25 - 9808 User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info