584523
9
Zoom out
Zoom in
Previous page
1/16
Next page
Ending active watering prematurely:
You can exit active watering (programmed or
started manually) prematurely without changing
the programs.
1. [ Fig. O7 ]: Press the Man. key.
SELECT CHANNELSELECT CHANNEL and the channel flash.
2. [ Fig. O20 ]: Select the active channel desired
(in the frame e. g. channel 4) using the - keys
and confirm by pressing the OK key.
Watering is ended and the main level is dis-
played.
Water all channels manually:
If all the channels are to be enabled manually, the
channels are opened manually one after the other
with the manual watering duration.
1. [ Fig. O22 ]: Press and hold down the OK key.
2. [ Fig. O23 ]: Also press and hold down the
Man. key for 3 seconds.
Run Time Man., MANUAL ALLMANUAL ALL and minutes flash
in the display.
3. [ Fig. O21 ]: Select the manual watering duration
(00:3000:30 minutes are preset) using the - keys
(e. g. 00:1500:15) and confirm by pressing the OK key.
Manual watering starts with channel 1,
MANUAL ALL MANUAL ALL and the frame around the active
channel flashes.
If the watering duration is not confirmed within
10seconds by pressing the OK key, the watering
begins with the watering duration displayed.
You can exit watering all the channels prematurely
by pressing the OK key + Man. key for 3 seconds.
Percentage Watering Duration
(% Run Time Key)
You can end the programming mode at any time by
pressing the % Run Time key.
% Run-time-function:
The programmed watering durations of all the
watering programs can be changed centrally in
10 % increments from 10 % to 200 %, without
having to change the individual programs (e. g. if
you wish to water your garden less in the autumn
than in the summer).
ATTENTION! If the run time % figures are above
100 %, programs may overlap as a result
(see Setting the watering programs).
1. [ Fig. O24 ]: Press the % Run Time key.
RUN TIME %RUN TIME % and the percentage watering duration
flash.
2. [ Fig. O25 ]: Select the figure for the percentage
watering duration using the - keys (e. g. RUN RUN
TIME 60 %TIME 60 %) and confirm by pressing the OK key.
The percentage watering duration has been
transferred and the main level is displayed.
E. g. in case of 60 % Run Time, a programmed
watering duration of 60 min. is reduced to 36 min.
Note:
When the percentage of the watering duration is
changed the display of the originally programmed
watering durations in the programs stays as it is.
When setting up / modifying a program, this is
automatically set to 100 % RUN TIME100 % RUN TIME. The % RUN % RUN
TIME TIME does not apply to manual watering.
Watering Breaks (Rain Off Key)
You can end the programming mode at any time by
pressing the Rain Off key.
Rain Off function:
If watering is not necessary, e.g. due to lengthy
rainfall, a watering break can be set. All the pro-
grams can be set for a 1 to 9-day break ( 1 to
9 ) or they can all be blocked ( Off ), in which
case manual watering is still possible.
1. [ Fig. O26 ]: Press the Rain Off key.
RAIN OFFRAIN OFF and Off is displayed.
2. [ Fig. O27 ]: Using the - keys, set the desired
break (e. g. 3 days 3 ).
Day Delay and the frame flash.
3. [ Fig. O28 ]: Confirm the break by pressing the
OK key.
The selected break (e.g. 3 days 3 DAYS OFF3 DAYS OFF) is
displayed and the programs are suspended for
the break selected.
From 2 days onwards, the remaining break period
displayed in hours (48H OFF48H OFF (48 hours) … 1H OFF1H OFF
(1 hour)).
To deselect the Rain Off function the Rain Off key
has to be pressed.
Key lock [ Fig. O29 ]:
The keypad can be locked to protect against
unintentional changing of the settings.
1. Press and hold down the OK key.
2. Also press and hold down the Rain Off key for
3seconds.
The lock symbol is displayed.
To disable the key lock, the OK key + Rain Off key
have to be pressed and held down for 3 seconds.
18
EN
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena 6030 - 1284 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena 6030 - 1284 in the language / languages: English as an attachment in your email.

The manual is 1.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena 6030 - 1284

Gardena 6030 - 1284 User Manual - German - 18 pages

Gardena 6030 - 1284 User Manual - Dutch - 17 pages

Gardena 6030 - 1284 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info