584523
6
Zoom out
Zoom in
Previous page
1/16
Next page
6. Remove the empty battery as necessary:
Depress the clip - (the battery is released)
and remove the empty battery.
7. Attach the battery 3 to the battery clip 4 and
insert it into the battery compartment 5.
8. Close cover 2 and let snap lock 1 engage.
9. Plug the mains plug of the 24 V (AC) power sup-
ply unit into a mains socket.
After this it is necessary to set the date and time
(see 4. OPERATION Setting the date and
time).
Master Channel:
To connect the master valve:
The master channel M is activated, as soon as
avalve is activated.
You can connect a central valve upstream of the
other valves to act as a master valve.
Connecting the valves [ Fig. I3 ]:
The example shows the connection of 2 valves
Art. 1278 in the Valve Box Art. 1255 to the
Watering Controller 4030 / 6030. As the output
ofthe Watering Controller is 24 V AC (alternating
current) for switching the valves, it is does not
matter which of the two cables of a valve is
inserted into C.
Labelling the valves:
! Label the valves (1 – 6), so that the channels
(CHANNELS 1, CHANNELS 2, …) of the
Watering Controller can be clearly assigned
to the valves.
Connecting the valves to the Valve Box:
" Connect one cable of the valve V1 to the cable
terminal 1 of the valve box.
§ Connect the other cable of the valve V1 to
acable terminal C of the valve box.
(All 4 cable terminals C are interconnected
and equivalent to one another).
$ Connect one cable of the valve V2 to the cable
terminal 2 of the valve box.
% Connect the other cable of the valve V2 to
acable terminal C of the valve box.
Other valves can be connected similarly to V1
and V2.
Connecting the Watering Controller to the
Valve Box:
& Connect a cable terminal C of the Watering
Controller to a cable terminal C of the valve
box. Both cable clips C are connected to each
other and equivalent.
/ Connect the cable terminal of channel 1
CHANNELS 1 to the cable terminal 1 of the
valve box.
( Connect the cable terminal of channel 2
CHANNELS 2 to the cable terminal 2 of the
valve box.
Other channels can be connected similarly
to CHANNELS 1 and CHANNELS 2.
Cable cross-section of the connection
cable:
The maximum permissible distance between the
Watering Controller and the valve depends on the
cross-section of the connection cable. For a dis-
tance of 30 m, the cross section is 0.5 mm2 and
0.75 mm2 for a distance of 45 m. No more than
3valves must be in operation at the same time.
The GARDENA connection cable Art. 1280 is
0.5mm2 in size and is 15 m long. Up to 6 valves
can be connected using this cable. The connec-
tion cable can be connected so that it is water-
tight using the cable clip Art. 1282.
Wall-mounting the Watering Controller
[ Fig. I4 ]:
The two screws (not supplied) for attaching the
Watering Controller have to be screwed into place
80 mm apart and the screw head diameter must
not exceed 8 mm.
1. Screw the screws 6 into the wall 80 mm apart.
2. Attach the Watering Controller.
3. Release snap lock 1 and open cover 2
(see Connecting your Watering Controller) and
mark hole for screw 6 of the elongated hole 7.
4. Screw the screw 6 into the elongated hole 7
for fixation.
5. Close cover 2 and let snap lock 1 engage.
15
EN
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena 6030 - 1284 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena 6030 - 1284 in the language / languages: English as an attachment in your email.

The manual is 1.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena 6030 - 1284

Gardena 6030 - 1284 User Manual - German - 18 pages

Gardena 6030 - 1284 User Manual - Dutch - 17 pages

Gardena 6030 - 1284 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info