584665
6
Zoom out
Zoom in
Previous page
1/10
Next page
Adjusting the cutting
mechanism:
e
w
q
e
9
r
9
w
ßq
The cutting gear of your cylinder mower was optimally adjusted
before leaving our company. If, after longer use,
a clean cut of the grass is no longer possible or the blade roller
contacts the lower blade, then the lower blade should be
adjusted as follows:
1. Clean the cylinder mower.
2. Lay the mower onto the ground, so that it cannot fall over
when adjusting the cutting mechanism.
3. Check cylinder
q
and lower blade
w
for notches and remove
these with a grindstone if necessary.
4. Unscrew the left and right hexagon screws
e
using a hexagon
wrench (10 mm) anticlockwise until the blade cylinder
q
can
only just turn freely.
5. Carefully tighten the left hexagon screw
e
using a hexagon
wrench (10 mm) whilst the blade cylinder
q
rotates, until it
lightly contacts the lower blade
w
.
6. Then unscrew the left hexagon screw again until the blade
cylinder just stops contacting the lower blade (rotates sound-
lessly).
7. Repeat the process on the right-hand side.
8. Cutting test:
Place a strip of paper
r
in such a way on the lower blade
w
that it points towards the spindle of the cylinder
q
.
9. Turn cylinder
q
carefully.
If the lower blade is set correctly
w
the paper will be cut off as
if with scissors.
10. Repeat the cutting test at different positions and on all blades
on the blade cylinder
q
.
Regrinding / repairs:
On safety grounds, only original GARDENA spares
may be used.
Please contact GARDENA Service if it is necessary to replace
the cutting tool, which will only become blunt after several years
use if well-maintained. Repairs to the cylinder mower and the
installation of the blades can be undertaken by suitable specialist
workshops.
Have the cylinder mower checked over in the autumn if possible
so that it is ready for use immediately when the next lawn-mowing
season starts.
For any other malfunctions please contact the GARDENA service
department.
8. Available accessories
GARDENA Grass Catcher Saves raking up the cut grass. Art. No. 4029
12
GB
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gardena 400 - 4018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gardena 400 - 4018 in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gardena 400 - 4018

Gardena 400 - 4018 User Manual - German - 10 pages

Gardena 400 - 4018 User Manual - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info