15
• If dust extraction and collection equipment can be mounted, make sure that they are
connected and used properly.
• Keep all body parts away from the cutting blades. Do not try to remove cuttings or hold
onto the material being cut while the blades are running. Remove jammed cuttings only
when the appliance is shut off.
• Carry the device by the handle when the blades are at a standstill.
• Wait until the electrical tool has come to a standstill before putting it down.
• Heavy protective clothing can lead to fast tiring and possibly to a heatstroke. Perform
heavy work in the early morning or later evening hours when the temperature is not as
high.
• Familiarise yourself with the appliance before first use. Especially make sure you know
how to switch it off.
• Keep all body parts away from the cutting head during activation.
• The specified vibration emission value limits the working hours. If you notice a tingling
or discolouration (white) of the fingers then stop working with the tool.
• Warning: The actual value of existing vibration emissions while using the machine may
differ from those in the manual respectively by the manufacturer. This can be caused by
the following factors to be considered before or during any of use:
- Is the machine used correctly?
- Is the method of cutting the material and how it is processed correctly?
- Is the state of use of the machine in the regulatory?
- Sharpness condition of cutting tool and proper cutting tool?
- Are the grips firmly mounted on the machine body?
• If you observe an uncomfortable feeling or a discolouration of the skin from your hands
while using the machine, please immediately stop working. Take adequate breaks from
work. In disregard of adequate work breaks, there may be a hand-arm vibration syndrome.
• There should be occur an appraisal of an utilization factor subjected to the work
respectively of usage the machine and place appropriate work breaks. In this way, the
utilization factor during the entire working time can be significantly reduced. Minimize
your risk, you are exposed to vibration. Maintain the machine following the instructions
in the manual.
• Avoid the use of the machine at a temperature of T = 10 ° C or less. Make a work plan
so that the vibration load can be limited.
• A degree of noise from this machine is not avoidable. Postpone noisy operation at
licensed and certain time periods. As the case may be observe rest time periods and
restrict the working hours to a minimum. For your personal protection and protection of
people working nearby, an appropriate hearing protection is worn. Use and handling of
the electrical tool
• Do not overload the device. Use the electrical tool intended for your work.
• Do not use the electrical tool if its switch is defective.
• Remove the plug from the mains socket and/or remove the storage battery before
making adjustments to the appliance, changing accessory parts, or putting the
appliance away.
English
