Manual Garden Groom Midi (page 6 of 82) (English, German, Dutch, French, Italian, Portuguese, Spanish)

536955

Zoom out

Zoom in

1/82

.6.

• The specified vibration emission value limits the working hours. If you notice a tingling or

discolouration (white) of the fingers then stop working with the tool.

• Warning: The actual value of existing vibration emissions while using the machine may differ

from those in the manual respectively by the manufacturer. This can be caused by the following

factors to be considered before or during any of use:

- Is the machine used correctly?

- Is the method of cutting the material and how it is processed correctly?

- Is the state of use of the machine in the regulatory?

- Sharpness condition of cutting tool and proper cutting tool?

- Are the grips firmly mounted on the machine body?

• If you observe an uncomfortable feeling or a discolouration of the skin from your hands

while using the machine, please immediately stop working. Take adequate breaks from work.

In disregard of adequate work breaks, there may be a hand-arm vibration syndrome.

• There should be occur an appraisal of an utilization factor subjected to the work respectively of

usage the machine and place appropriate work breaks. In this way, the utilization factor during the

entire working time can be significantly reduced. Minimize your risk, you are exposed to vibration.

Maintain the machine following the instructions in the manual.

• Avoid the use of the machine at a temperature of T = 10 ° C or less. Make a work plan so that

the vibration load can be limited.

• A degree of noise from this machine is not avoidable. Postpone noisy operation at licensed

and certain time periods. As the case may be observe rest time periods and restrict the working

hours to a minimum. For your personal protection and protection of people working nearby, an

appropriate hearing protection is worn.

Use and handling of the electrical tool

• Do not overload the device. Use the electrical tool intended for your work.

• Do not use the electrical tool if its switch is defective.

• Remove the plug from the mains socket and/or remove the storage battery before making

adjustments to the appliance, changing accessory parts, or putting the appliance away.

• Keep unused electrical tools out of reach of children. Do not let people use the appliance who

are not familiar with it or who have not read its instructions.

• Keep cutting tools sharp and clean.

• Before use, make sure the cutting head is firmly attached.

• Handle electrical tools with care. Make sure moving parts function perfectly and do not jam and

check whether parts are broken or damaged in such a way that the function of the electrical tool is

impaired. Have damaged parts repaired before using the appliance.

• Always check the appliance for damage before putting it into operation. If the appliance, cable,

or plug show visible damage, they may not be used. Do not use the appliance if it shows signs of

a malfunction.

• If the appliance has a fault, do not attempt to repair it yourself. In the event of damage please

contact Customer Service (see section entitled “Customer Service”).

• Only have the device repaired by a qualified professional.

• Only use original accessories and original spare parts.

• Do not make any changes in the appliance.

• Use the appliance only when it is properly assembled and operational.

• Use the electrical tool, accessories, insert tools, and so on according to these instructions. In

the process, take the working conditions and task to be performed into consideration.

• Before use, familiarise yourself with the environment and pay attention to any sources of

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garden Groom Midi in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garden Groom Midi Manual

Product: