782328
6
Zoom out
Zoom in
Previous page
1/16
Next page
6
Safety switch (Fig. 5)
Open the cover of the safety switch
Place the safety switch over the holes on the guide bar.
Close the cover and secure the switch in place with the two screws supplied as
shown in figure 5.
Use the two supplied cable clips to hold the cable in place.
Collecting bag (Fig. 6)
Pull the safety flap upwards and hold.
Attach the holder of the collecting bag (1) to the hooks onto the housing (2) as shown
in figure 6 on previous page.
Setting the working depth
Caution! Never adjust the working height unless the motor is switched off and the
blade shaft has stopped moving.
The cutting height can be adjusted directly from the two front wheels.
5 different cutting height settings are available for each individual wheel.
Pull the level (1) as shown in figure 7 and move it forward, or backward to the desired
working depth for both wheels. Please note that the same position should be selected
for both wheels.
The available working depths for the rake and scarifier attachment can be seen below.
Rake Scarifier
Position 1 (1st from rear) 10 mm 4 mm
Position 2 6.5 mm 0.5 mm
Position 3 3.0 mm -3.0 mm
Position 4 -0.5mm -6.5 mm
Position 5 -4.0 mm -10 mm
Figure 7
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garden Gear N1B-JY-30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garden Gear N1B-JY-30 in the language / languages: English as an attachment in your email.

The manual is 0.74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info