644042

GAO EMT799-60M Manual

2
Zoom out
Zoom in
Previous page
1/3
Next page
Initial operation
Plug the countdown timer (without any device plugged in!) into a suitable mains socket (with
a protective earth conductor).
Plug the consumer into the socket on the front of the countdown timer. Insert the plug all the
way.
If the consumer connected to the countdown timer has a mains switch, turn this on.
Press the “START” button on the countdown timer.
The socket on the front of the countdown timer is activated, the mains voltage connected and
the signal lamp next to the “STOP” button lights up.
The timer run starts, the LC display shows the current timer time in the format MM:SS
(minutes:seconds).
After expiration of the time, the mains voltage of the countdown timer's socket is cut off and
the signal lamp goes off.
If desired, you can restart the timer run now.
If you want to terminate the timer run early, press “STOP”.
This cuts off the mains voltage of the countdown timer's socket and the signal lamp goes off.
At the next start of the countdown timer via the button “START”, the timer run starts again
at 60 minutes.
Maintenance and care
The product does not require any maintenance. You should never open it or take it apart.
Before cleaning the product, disconnect it from the socket. Clean the outer side with a dry,
clean, soft cloth. Never use aggressive cleansing agents or solvents since these may damage
the surface of the housing or impair its operation.
Disposal
Electronic and electronic devices must not be disposed of in the domestic waste.
Dispose of the product at the end of its serviceable life according to the relevant
legal provisions and regulations (e.g. return it to a special recycling facility of your
town).
Operating Instructions
Digitaler Countdown Timer 60min
“EMT799-60M”
Intended Use
The product has a socket that is automatically turned off via the integrated countdown timer
after expiration of the countdown time (60 minutes). You can plug in a lamp or a similar suitable
device which will be switched on and off automatically after 60 minutes.
The product is only intended for operation in dry indoor rooms.
All safety instructions and notes on operation in this manual must be observed. These
instructions not only protect the device but, in particular, your health. Please read the
entire operating manual before using the product. Thank you!
Features and technical data
Special feature: Two-pole cutoff
Only for operation in dry indoor rooms
Integrated socket with an earthing contact and child protection
Countdown time 60 minutes (cannot be changed)
LC display for the countdown time
Can be plugged into a 230V~/50Hz earthed mains socket
Maximum connecting load: 3680 W (230V~, 16A) resistive load
Contents
Countdown timer
Operating instructions
Safety instructions
In case of damage incurred by disregarding this instruction manual, the
warranty claim is void. Liability for any and all consequential damage is
excluded!
Nor do we assume liability for damage to property or personal injury,
caused by improper use or failure to observe the safety instructions. The
warranty is voided in these cases.
The unauthorized opening, conversion and/or modification of the product is
inadmissible because of safety and approval reasons (CE).
The product is designed in conformity with protection class 2. The only voltage
source that may be used is the correct mains socket-(230V~/50Hz, with
protective conductor) of the public supply system.
The product is not a toy and should be kept out of the reach of children.
Therefore, be especially careful when children are around. Children might try
to put objects through the openings of the socket for example. There is a risk
of a fatal electric shock.
The product must only be used in dry interiors, it must not get damp or wet.
Never touch the product or the mains plug into which you want to insert the
countdown timer with damp or wet hands.
There is a risk of a fatal electric shock.
Never pull a mains plug connected to the outlet of the countdown timer out of
the outlet by the cable. Always pull the plug from the socket by the gripping
area provided on the side.
Fans, heaters, fan heaters or radiators with open elements should not be
operated unattended. We recommend not connecting such devices to the
countdown timer. Danger of fire!
Do not leave packaging material unattended. It may become a dangerous toy
for children!
Handle the product carefully, it can be damaged by impacts, strikes or by
falling from a low height.
If the housing of the product is damaged, do not use the product any more!
When it is connected to the mains, neither touch the countdown timer nor the
connected devices. Switch off the mains socket first to which it is connected
(switch off the circuit breaker). Then you can remove the countdown timer from
the mains socket. Take the product to a specialist workshop or dispose of it in
an environmentally friendly way.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for GAO EMT799-60M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of GAO EMT799-60M in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info