611611
3
Zoom out
Zoom in
Previous page
1/3
Next page
Maintenance and Cleaning
The product does not require maintenance. The product contains no parts that require servi-
cing. Therefore, do not open/dismantle it. Maintenance or repairs may only be performed by
quali ed personnel or a specialised repair shop.
 Before cleaning, disconnect the weekday switch timer from the power supply. To do this,
pull it completely out of the mains socket (the wall socket). All settings are saved due to the
integrated NiMH battery.
 Use a clean, dry, soft cloth for cleaning. Do not press too hard on the display; this can lead to
scratches and could also cause damage to the display and touchscreen!
 Dust can easily be removed using a clean, soft and long-bristled brush and a vacuum cleaner.
Do not use abrasive cleaning agents, cleaning alcohol or other chemical solutions,
since these could damage the housing or even impair operation.
Disposal
Dispose of the unserviceable product according to the relevant statutory regulations!
Technical Data
Operating voltage .................230 V/AC, 50 Hz
Switching capacity ................max. 3680 W
Protection class ....................I
Model: ................................... Relay; 1-pole disconnection
Child-proof lock ..................... yes, integrated in socket
Switch times per day ............ 16 on/off programs
Shortest switching duration .. 1 min
Countdown timer .................. 1 min to a max. of 99 h, 59 min, 59 s
Data storage ......................... with an internal NiMH battery (max. approx. 10 months with fully
charged battery)
Ambient temperature ............0 °C to +40 °C
Ambient humidity ..................0% to 90% relative humidity, not condensing
Dimensions ........................... 70.5 x 132 x 37 mm (W x H x D, without plug)
Weight ..................................200 g
Countdown Mode
In the countdown mode, a time of maximal 99 hours, 59 minutes, 59 seconds can be set.
Depending on the operating mode of the weekday switch timer, the device is switched off or on
after the timer has counted down.
Operating mode “ON” or “AUTO ON” (mains socket/device is switched on): The
connected device is switched off after the timer has counted down
Operating mode “OFF” or “AUTO OFF” (mains socket/device is switched off): The
connected device is switched on after the timer has counted down
When the countdown mode was started, all automatic switching programs are deactivated
for the duration of the countdown! That means that the device is not switched on or of at
the times and weekdays programmed in the program group until the timer has counted
down.
Setting the timer and start of the countdown timer:
In the time mode, press the “MENU” button 2x until the symbol “CTD” appears on the bottom
right and the hours of the timer ash “0:00:00”.
Set the hours of the countdown timer with the “+1” or “-1” button (keep the respective button
pressed down for quick setting).
Press the “OK” button brie y to con rm.
The minutes of the countdown timer starts ashing; set the minutes with the “+1” or “-1”
button (keep the respective button pressed down for quick setting).
Press the “OK” button brie y to con rm.
The seconds of the countdown timer start ashing; set the seconds with the “+1” or “-1”
button (keep the respective button pressed down for quick setting).
The countdown timer is started by pressing the “OK” button brie y.
 When the timer has counted down (at 0:00:00), the front socket and the device connected to
it is switched on or off.
When the weekday switch timer is in “ON” or “AUTO ON” mode (socket/device is
switched on), the connected device is switched off when the timer has counted
down.
When the weekday switch timer is in “OFF” or “AUTO OFF” mode (socket/device
is switched off), the connected device is switched on when the timer has counted
down.
Early termination of the countdown timer:
If the countdown timer is to be terminated early, press the “MENU” button several times until
the timer is shown in the display.
The countdown timer cannot be reset as long as the weekday switch timer
shows the time or the programmed switching times!
Press the counter-sunk “RCL” button brie y e.g. with a toothpick.
The countdown timer is then reset to “0:00:00”, the hours of the timer ash again (you can
now set a new time and restart the countdown timer as described above).
Press the “MENU” button brie y to leave the setting mode and to return to the time display.
Alternatively, do not press any button for 2 minutes.
This deactivates the countdown timer and the weekday switch timer continues with its normal
switching program.
Random function
With the random function, the set switch on/off times are delayed by 4 to 32 minutes.
The random function can only be used for program times of the program groups,
but not for the countdown timer.
To turn the random function on or off, press the “-1” button brie y.
When the random function is turned on “RND“ is ashing on the bottom right in the display.
Reset
In order to reset the weekday switch timer to the factory settings and to delete all programming,
keep the countersunk “RST” button pressed for several seconds. All display segments are
shown in the display, then the weekday switch timer is ready for operation.
Note:
All settings and programming are lost upon reset!
Activating the lighting of the LC display/night light function
Use the “ ” button to switch the display light on or off.
The light can also be used as night light due to its large size and brightness.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for GAO EMT769A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of GAO EMT769A in the language / languages: English as an attachment in your email.

The manual is 0,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of GAO EMT769A

GAO EMT769A User Manual - German, Dutch - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info