606991
18
Zoom out
Zoom in
Previous page
1/28
Next page
18
6. The hour indicator is flashing. Set the hours with the ”
” or ”
” buttons (for quick adjustment
hold the button for longer) and confirm it again by briefly pressing the ”SET” button.
7. The minute indicator is flashing. Set the minutes with the ”
” or ”
” buttons (for quick
adjustment hold the button for longer) and confirm it by briefly pressing the ”SET” button.
8. For further programming proceed as described in steps 2-7.
For each program group (1-10) the turn on time (icon ” ”) and the turn off time
(Symbol ” ”) is to be programmed
Otherwise the load (eg a lamp) is switched on at the programmed time, but it is
never switched off.
This is why you should always program the turn on time first (steps 2-7) and
afterwards the turn off time (again steps 2-7) of the program groups selected by
you, note the icon on the right of the display for the turn on and off time.
d) Activating / Deactivation switching programs:
Hold the ”RCL” button down for a longer time in order to activate or deactivate the automatic
switching programs (which you have set in the program groups).
On the right in the display the icon ” ” appears when the automatic switching
programs are active.
If the icon disappears there will be no automatic on/off switching of the
connected load.
e) Countdown setting
In countdown mode (display ”CD” in the lower part of the display) the load stays switched on until
the countdown time set by you (possible setting from ”1 minute” to ”99 hours/59 minutes”) has
run out. Then the load is switched off.
When the countdown mode is selected or started, all automatic switching
programs are deactivated. That means that there is no turning on or off at the
defined times and weekdays in the program groups.
Press the ”P” button as many times until ”CD” is shown on the display.
Press the ”SET” button. The hour indicator is flashing.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for GAO EF700ET at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of GAO EF700ET in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of GAO EF700ET

GAO EF700ET User Manual - German - 28 pages

GAO EF700ET User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info