657176

Gamma Scout Radiation Detector Manual

16
Zoom out
Zoom in
Previous page
1/26
Next page
R
Setting the Log, Clearing the Memory
GAMMA-SCOUT
®
automatically logs the number of pulses measured, and stores this data in its
internal memory. This data can be read and processed quickly and conveniently on a PC using the
TOOLBOX software (for exact instructions, go to www.gamma-scout.com ).
The factory settings for the logging process mean that GAMMA-SCOUT
®
will accumulate the pulses
for each week and store them as weekly values. On this basis, the memory capacity is sufcient to
log weekly values for 600 years.
As the following table demonstrates, you can also set shorter logging intervals, with corresponding
reductions in the storage capacity. Logging stops when the storage capacity is full. So far, we have
not had a single request for an overwrite.
Logging interval Display Storage capacity Logging interval Display Storage capacity
1 week Pr. 7d approx. 615 years 10 minutes Pr. 10min approx. 7.3 month
3 days Pr. 3d approx. 263 years 5 minutes Pr. 5min approx. 3.7 month
1 day Pr. 1d approx. 88 years 2 minutes Pr. 2min approx. 1.5 month
12 hours Pr. 12h approx. 44 years 1 minute Pr. 1min approx. 20 days
2 hours Pr. 2h approx. 7.3 years 30 seconds Pr. 30s approx. 10 days
1 hour Pr. 1h approx. 3.7 years 10 seconds Pr. 10s approx. 3 days
30 minutes Pr. 30min approx. 1.8 years
Clear log PdEL Clear data
Setting the Log
• Press the button to switch to “log” mode. The display shows the log symbol .
The bar chart will also appear briey, indicating how much log memory is currently being used.
Each bar equals 1,000 measured values, so 32,000 values would use up ca. 3% of memory.
• By pressing the button, you select more frequent logging and, consequently, shorter logging
intervals.
• By pressing the button, you select less frequent logging and, consequently, Ionger logging
intervals.
By pressing the button, you enter the logging interval just selected.
You can transfer the logged data to a personal computer at any time, and then clear the
GAMMA-SCOUT
®
memory for fresh use.
GAMMA-SCOUT
®
automatically prolongs the logging interval to one week when there are only 256
bytes (of 65,280 bytes) of memory capacity remaining. You can set shorter logging intervals only
once storage has been cleared.
Clearing the Memory
• To clearing the memory use the following key sequence: Key , then or ,
scroll until “Pdel” appears, then press the key.
14
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gamma Scout Radiation Detector at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gamma Scout Radiation Detector in the language / languages: English as an attachment in your email.

The manual is 2,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gamma Scout Radiation Detector

Gamma Scout Radiation Detector User Manual - German - 26 pages

Gamma Scout Radiation Detector User Manual - Dutch - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info