757939
10
Zoom out
Zoom in
Previous page
1/22
Next page
NL - Originele gebruiksaanwijzing 8
3.6 Selecteren van de functie, Fig. E.
De machine heeft 1 centrale schakelaar (5)
waarmee 4 functies kunnen worden geselec-
teerd.
Wanneer u aan de schakelaar (5) draait,
moet u eerst de blokkeerknop (E) indrukken.
Pas daarna kunt u de schakelaar draaien.
Laat vervolgens de blokkeerknop (E) weer
los en zet de schakelaar (5) in de gewenste
positie. Draai deze totdat de schakelaar (5)
weer “vast klikt”.
Navolgend staan de mogelijkheden, hun toe-
passingen en de instelling van de schakelaar
(5) aangegeven:
- Positie A = beitelfunctie. Voor het weg-
breken van steen, metselwerk of tegels.
- Positie B = instelfunctie.
In deze stand kunt u de beitel eerst in de
juiste positie positie draaien alvorens u
stand A gaat gebruiken!
- Positie C = boren + hamerfunctie. Voor
boren in beton, steen of metselwerk.
- Positie D = boorfunctie. Voor het boren in
zachte steen, hout, kunststof en metaal.
LET OP: draai nooit aan de schakelaar (5)
wanneer de motor van de machine draait.
Wissel alleen de stand van de schakelaars als
de machine is uitgeschakeld.
Druk altijd de blokkeerknop (E) in wanneer u
de schakelaar (5) verdraait.
3.7 In- en uitschakelen, Fig. G.
Kies eerst de juiste instelling: boren, hamer-
boren of beitelen (zie voorgaande hoofdstuk
“selecteren van de functie”).
Zet het instelwiel voor toerental (9) desge-
wenst op het maximale toerental (stand F).
Om de machine in te schakelen drukt u de
aan/uit-schakelaar (10) in.
Om de machine uit te schakelen laat u de
aan/uit-schakelaar (10) weer los.
Hoe dieper u de aan/uit-schakelaar (10)
indrukt, hoe sneller de machine draait of
hamert. De snelheid kunt u regelen met de
toerentalregeling (9) – zie hoofdstuk “Instel-
len van het maximum toerental”.
Wanneer de aan/uit-schakelaar (10) volledig
is ingedrukt, kunt u de vergrendelknop (8)
indrukken. De machine staat nu continu
ingeschakeld.
Door vervolgens nogmaals de aan/uit-scha-
kelaar (10) kort verder in te drukken schiet
de vergrendelknop (8) weer uit de vergren-
delstand.
LET OP: vergrendeling is alleen mogelijk in
de rechtsdraaiende stand.
3.8 Links/rechts-regeling Fig. G (7)
Met de links/rechts-schakelaar (7) kunt u de
boorkop linksom of rechtsom laten draaien.
De schakelaar (7) in de stand met de pijl naar
voren gericht is rechtsdraaiend voor boren
en vastschroeven.
De schakelaar (7) in de stand met de pijl naar
achteren gericht is linksdraaiend en geschikt
voor het lostrekken van een vastgelopen
boor of losschroeven.
LET OP: verstel de links/rechts-schakelaar
(7) nooit als de motor nog draait !
NL
E
C
B
A
D
C
D
B
A
F
5
E
E
C
B
A
D
C
D
B
A
G
8
7
9
10
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gamma BH-1050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gamma BH-1050 in the language / languages: Dutch, French as an attachment in your email.

The manual is 3,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info