583720
23
Zoom out
Zoom in
Previous page
1/23
Next page
2222
INSTALLATION
Test
NOTICE
Having accomplished air installation and leak test , test operation must be done. Before test operation,
wiring safety inspect must be carefully done.
Turn the gas shut-off valve to close, connect charging hose(low pressure)
to the service valve, then open gas shut-off valve again.
Connect refrigerant bottle to charging hose, convert it,
then fill liquid refrigerant as foregoing table.
Service port
Do not let gas refrigerant into the system.
Install the drain joint(only for heat pump type)
Install the double-channel drain joint in the hole
of outdoor unit's bottom, then connect drain hose and joint.
Bottom
double-channel
drain joint
Drain hose
R407C
Add refrigerant
If the connecting pipe is longer than 7 meters, add refrigerant as needed. (Cool only type) add amount A=
(Lm-7m) 15g/m ; (Heat pump type)add amount A= (Lm-7m) 50g/m. (A: add refrigerant amount , L: the
length of connecting pipe)
14
4
7
0
0
8
15
50
9
30
100
10
45
150
the length of connecting pipe (m)
(Cool only type)add amount (g)
(Heat pump type)add amount (g)
Close the gas shut-off valve, disconnect the manifold gauge,
and open gas shut-off valve again.
Discharge air as foregoing method.
Tighten nuts and cap of each valve.
Test operation procedure:
Only can check switch be done, and remote controller can not.
1.Connects system with power plug, and open front panel.
2.Press check switch, then system operates as test.
3.If the indicate lamps light first, go out in succession, the system
is normal, otherwise, there has lamp flashing indicating that
system has wrong. Please check system for once.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Galanz AUS-12HR53CA2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Galanz AUS-12HR53CA2 in the language / languages: English as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info