Manual Gaggia Syncrony Compact Digital (page 15 of 67) (Dutch)

22881

Zoom out

Zoom in

1/67

ENGLISHENGLISH

• 29 •• 28 •

Repairing / Maintenance

- If the coffee maker falls and you see or suspect

damages or malfunctions, immediately

remove the plug from the wall. Never use faulty

machines.

- Repairs must be made by authorized service

centres only.

- If authorized service centres do not carry out

maintenance work and/or repairs, the

manufacturer is not liable for any damages.

Fire Fighting

- In the event of a fire, use carbon dioxide

extinguishers (CO

). Do not use water or

powder extinguishers.

DESCRIPTION OF PARTS

See Fig.01

1 Coffee bean container

2 Coffee bean container cover

(aroma preserver)

3 Grinding control knob

4 Dose control knob

5 Ground coffee doser cover

6 Drip plate for placing coffee cups

7 ON-OFF switch

8 Water tank cover

9 Water tank

10 Coffee grounds drawer

11 Power cord

12 Drip tray + plate

13 Height adjustable coffee dispenser

14 Steam / hot water nozzle and pipe

15 Front cover

16 Steam knob

17 Coffee dispenser

18 Control panel

19 Key of coffee dispenser

20 Cleaning brush

21 Ground coffee measuring scoop

Control panel

22 Espresso coffee selector button / Page up

in programming mode

23 Normal coffee selector button / Page down

in programming mode

24 “Caffe lungo” selector button / ESC in the

programming mode

25 Ground coffee selector button

26 Hot water selector button

27 Descaling selector button

28 Programming button / “OK” in the

programming mode

29 LCD display

4 INSTALLING THE COFFEE

MAKER

For your own safety and the safety of others,

follow the “Safety Rules” (see chapter 3).

4.1 Packaging

The original packaging was designed and made

to protect the appliance during shipment.

We recommend you keep it for future needs.

4.2 Preliminaries

•Remove the coffee maker from the

packaging and position it in a suitable

location that meets the requirements

specified and described in the safety rules

(chap.3).

• Open the machine door, take the drip tray

(12) from the package, and fit the dregs

box (10); then, fit the drip tray in the

machine (Fig.21).

• Make sure that the drip tray and plate

(Fig.01, pos. 12), the coffee grounds drawer

(10) and the coffee dispenser (17) are fitted

correctly and that the front cover (15) is

closed.

• Keep the cleaning brush (20) and the coffee

dispenser key (19) supplied with the appliance

within easy reach.

If the display signals a fault when you

switch on the machine, it means that

one of the above-described components

has not been properly positioned (Par.15).

4.3 Preparing the coffee maker for use

• Open the water tank cover (Fig.02) and

remove the tank (Fig.03). Rinse and fill with

fresh potable water (Fig.04); we recommend

that you do not exceed the “MAX” level mark.

Replace the water tank in its housing and

reposition the cover on top.

Always fill the tank (9) with fresh still

water. Hot water and other liquids

can damage the tank and/or the appliance.

Do not operate the appliance without

water: make sure that there is enough

water inside the tank.

• Lift the cover (Fig.05) and fill the container

with coffee beans (Fig.06).

Use coffee beans only. Ground and

instant coffee, as well as other items,

will cause damage to the appliance.

• Set the cover back in place on the coffee

container (1).

• Insert the plug into the outlet on the back of

the coffee machine (Fig.07) after making sure

that the on/off switch (7) is set on “O”.

Insert the plug on the other end of the cord

into a suitable wall outlet.

• The machine on/off switch is set on “O” (OFF);

to turn the machine on just press the button

(Fig.08); the machine will begin to heat up

and the display will show:

RINSING

WARMING UP ...

When the machine reaches the right tempera-

ture, it will carry out a rinse cycle.

• To load the circuit, direct the steam pipe

(Fig.01-pos.14) over the drip tray, place a cup

or other suitable receptacle below the steam

nozzle and press the button (26); the following

messages will be displayed in turn:

RINSING

WARMING UP ...

HOT WATER

WARMING UP ...

• Turn the knob (Fig.09) anticlockwise and wait

until water is discharged from the steam pipe

in a steady stream; to stop the flow of water,

turn the knob clockwise.

Note: After a long period of disuse,

if the water tank has been completely

emptied, you must reload the circuit before

starting up the machine. The circuit must

also be loaded every time the display shows

the following message:

VENTILATE

• Press pushbutton 26 again.

•When the heating-up phase reaches

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gaggia Syncrony Compact Digital in the language / languages: Dutch as an attachment in your email.

The manual is 3,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gaggia Syncrony Compact Digital Manual

Product: