620079
31
Zoom out
Zoom in
Previous page
1/88
Next page
• 31 •
English
• Press the “ button again when the
amount of coffee in the cup reaches
the desired level.
At this point, the
button is pro-
grammed; each time it is pressed and
released, the machine will brew the same
amount of co ee that has just been pro-
grammed.
The same operation can be repeated for
the “
“ button. When the “ or
button is pressed twice to brew coffee,
the machine will brew double the stored
quantity.
using a key. Do not pour co ee beans
when the co ee grinder is working.
The machine lets you make slight adjust-
ments to the co ee grinder to adapt it to
the kind of co ee used.
This adjustment should be carried out by
adjusting the pin on the inside of the cof-
fee bean hopper; this pin must be pressed
and turned only with the key provided
with the co ee machine.
Press and turn the pin one notch at a time
and brew 2-3 cups of coffee; this is the
only way to notice di erences in grind.
The reference marks inside the coffee
bean hopper indicate the grind setting.
There are 5 different grind settings to
choose from with the following refer-
ences:
1 - Coarse Grind
2 - Fine Grind
Adjusting the Coff ee Length
The machine allows you to adjust the
amount of brewed coffee according to
your taste and/or the size of your cups.
Each time the
or “ buttons are
pressed and released, the machine brews
a pre-set amount of coffee, as per fac-
tory settings. This amount may be repro-
grammed to your taste. Each button may
be individually programmed for a speci c
brew setting.
As an example, the following procedure
describes the programming of the
button, which is normally associated with
espresso co ee.
Place a cup under the dispensing
spout.
Hold the “ button pressed for 5
seconds to enter the programming
mode; the
“ icon will blink quickly
and the co ee will start to be brewed;
the icon will flash during the whole
co ee brewing cycle.
Blinking
quickly
1
2
OFF-Mode
The machine is designed for energy sav-
ing. The machine automatically turns o
after 60 minutes of inactivity.
Note: During the turning o
phase, the machine performs
a rinse cycle, if a co ee product has
been brewed.
Warning: When the power cord is in-
serted, the machine is in OFF-Mode.
To turn the machine on again simply press
the ON/OFF button; in this case the ma-
chine will go through the rinse cycle only
if the boiler is cold.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggia RI9933 Unica at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggia RI9933 Unica in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 8,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggia RI9933 Unica

Gaggia RI9933 Unica User Manual - Dutch, Polish, Portuguese, Spanish - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info