711726
22
Zoom out
Zoom in
Previous page
1/48
Next page
22
English
Problem Cause Solution
The machine circuit is blocked by
limescale.
Descale the machine.
The milk does not froth. The milk frother is dirty or not
assembled or installed correctly
Clean the milk frother and make sure it
is correctly assembled or installed.
The type of milk used is not
suitable for frothing.
Dierent types of milk result in
dierent amounts of froth and dierent
froth qualities. Semi-skimmed or full-
fat cow's milk give good results.
The lter does not t. You need to remove air from the
lter.
Let air bubbles come out of the lter.
There is still water in the water
tank.
Empty the water tank before you
install the lter.
There is water under the
machine.
The drip tray is too full and
overowed.
Empty the drip tray when the drip tray
full indicator pops up through the drip
tray. Always empty the drip tray before
you start descaling the machine.
The machine is not placed on a
horizontal surface.
Place the machine on a horizontal
surface so that the drip tray full
indicator works properly.
Note: If you are unable to solve the problem with the information in
this table, contact your local reseller or an authorized service center.
Contact details are included in the warranty booklet supplied
separately or visit
www.gaggia.com/n-m-co/espresso/world-wide or www.gaggia.
it/n-mco/espresso/contact.
4219_460_3728_1_booklet_A5_v2.indd 22 14/02/17 08:49
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggia RI8260 SUP047G - Velasca at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggia RI8260 SUP047G - Velasca in the language / languages: English, Italian as an attachment in your email.

The manual is 8,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggia RI8260 SUP047G - Velasca

Gaggia RI8260 SUP047G - Velasca User Manual - English, German - 68 pages

Gaggia RI8260 SUP047G - Velasca User Manual - German - 23 pages

Gaggia RI8260 SUP047G - Velasca User Manual - Dutch - 72 pages

Gaggia RI8260 SUP047G - Velasca User Manual - French - 72 pages

Gaggia RI8260 SUP047G - Velasca User Manual - Italian - 68 pages

Gaggia RI8260 SUP047G - Velasca User Manual - Polish - 72 pages

Gaggia RI8260 SUP047G - Velasca User Manual - Portuguese, Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info