3594
38
Zoom out
Zoom in
Previous page
1/42
Next page
ENGLISH
• 38 •
ON/OFF TIME
OFF 9:30
then press “
” or “
” to set the minutes and memorise the setting
by pressing “MENU/OK”.
Warning: if the on/off time settings coincide, the
machine will ignore both. After the times have been
set, the clock must be activated in order for the function to work.
Activating the automatic on/off function
Note: activating this function makes sense only if you
have already set the on/off times.
Press “
” or “
” to select the function:
CLOCK
enable it by pressing “MENU/OK”.
The display will show:
CLOCK
OFF
In this case pressing “MENU/OK” will deactivate the function.
Choose to activate the function by pressing “
” or “
” and when
CLOCK
ON
appears, memorise the setting by pressing “MENU/OK”.
When you exit the programming mode, the machine will check the set
parameters. If the current time falls within the set deactivation time,
the display will indicate:
ENERGY SAVING
Note: during the set deactivation period, the
machine can be restarted at any time by pressing
“MENU/OK”.
Later, to deactivate the machine again, go into the programming
mode by pressing “MENU/OK” and exit immediately by pressing
“ESC”.
RINSING CYCLE
With this function, all the parts involved in the coffee dispensing
process undergo a washing cycle with water.
During the wash cycle it is recommended that a person
be on hand to supervise the operation. Before per-
forming the rinsing cycle fill the water tank.
Select the function by pressing the key “
” or “
”:
RINSING CYCLE
Press the key “MENU/OK” to start the rinsing cycle, the display
shows:
RINSING CYCLE
The machine brews about half quantity of the water contained in the
tank from the dispenser.
Then the cycle stops automatically, and the display shows:
SELECT PRODUCT
READY FOR USE
FACTORY SETTINGS
This function allows you to restore all the machine operating parameters
originally set by the manufacturer.
After accessing the programming mode, press “
” or “
” to select
the function:
FACTORY SETTINGS
then enable it by pressing “MENU/OK”. The following indication
will appear:
FACTORY SETTINGS
NO
Choose whether you want to restore the factory settings by pressing
” or “
” and press “MENU/OK” to confirm your selection.
Caution: when you restore all the factory settings, you
will lose any custom settings you have made on the
machine.
14 LEGAL INFORMATION
This instruction book contains the information you need in order to
use and upkeep your appliance correctly.
The information should be viewed as a guideline for using and
upkeeping your coffee maker in safety. The information is not
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggia Libretto Titanium at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggia Libretto Titanium in the language / languages: English, Dutch, Italian as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info