3594

Gaggia Libretto Titanium Manual

32
Zoom out
Zoom in
Previous page
1/42
Next page
ENGLISH
• 32 •
While hot water is being dispensed, the silicone tube inside the
cappuccinatore must be inserted into the grating of the drip tray.
Make sure the silicone tube cannot slip out while the machine is in
use.
Note: Insert the tube into the grating, so that to avoid
any contact with dirty water or ground coffee residues;
the risk is that the drip tray contents may be sucked up.
Steam/Cappuccino with the cappuccinatore
The steam may be used to froth milk for cappuccino and to heat up
beverages.
Danger of scalding!
The steam may be preceded by brief sprays of hot water.
The dispensing tube can reach very high temperatures: avoiding
touching it directly with your hands.
• Position the cappuccinatore over the drip tray, open the “hot
water/steam” knob (16) for a few seconds to discharge residual
water from the cappuccinatore; in a short time only steam will
issue from the tube.
• Close the knob (16).
• Place the intake tube in a suitable receptacle or directly into a
container of milk, placed next to the machine.
• Place a cup containing previously prepared coffee beneath the nozzle
of the cappuccinatore.
• Open the knob (16); frothed milk will start issuing from the
cappuccinatore.
• Move the pin on the cappuccinatore to regulate the thickness of the
foam; by pushing it upward you will increase its volume.
When preparing cappuccino, use cold milk to ensure
the best results.
• When you have finished using the cappuccinatore and steam, clean
the cappuccinatore to remove residual milk.
• Place a container filled with fresh drinking water alongside the
machine and place the tip of the intake tube inside the
container.
• Proceed as if you were making cappuccino, allowing the dirty water
to flow into a receptacle or directly into the drip tray.
Cleaning the cappuccinatore.
After using the cappuccinatore, you should clean it thoroughly to ensure
maximum hygiene and functionality over time.
The cleaning steps are as follows:
• Loosen the ring nut of the cappuccinatore.
• Remove the cappuccinatore from the steam tube.
• Remove the casing of the cappuccinatore.
• Take off the cover, pin and intake tube.
• Clean all the parts of the cappuccinatore thoroughly with running
drinking water.
• Reassemble the cappuccino maker.
• Insert the cappuccinatore back in the steam tube.
• Tighten the ring nut securely.
Note: if the ring nut is not securely tightened, the
cappuccinatore may slip out during use.
11 CLEANING AND MAINTENANCE
General Cleaning
• Maintenance and cleaning should only be carried out when the
appliance is cold and disconnected from the power supply.
• Do not immerse the appliance in water and do not wash the parts in
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggia Libretto Titanium at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggia Libretto Titanium in the language / languages: English, Dutch, Italian as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info