720139
16
Zoom out
Zoom in
Previous page
1/88
Next page
• 16 •
Preliminary Operations
Remove the co ee machine from the packaging and position it in
a suitable place.
Using the Machine for the First Time
Remove the water tank from its seat, rinse
it and  ll it with still drinking water. Do not
exceed the level (MAX) indicated on the
water tank. Put the water tank back in its
seat.
Hot water or any other liquid may damage the tank
and/or the machine. Do not turn on the machine
when the tank is empty: Make sure there is enough water
in the tank.
Insert the plug into the socket on the back of the machine (see
Fig. A) and insert the plug of the other end of the cable into a wall
socket with suitable power voltage.
(GXI/02) - Make sure the switch is on /
position; if this is not the case, turn it onto
that position.
To switch on the machine, set the power
button ON/OFF (on the back of the machine)
to “I”.
Note: Before starting the machine for the  rst time
or if the water tank has been completely emptied,
prime the water circuit.
Priming the Water Circuit
GXI/01
The
button turns on and the
button blinks..
Place a cup under the dispensing spout.
Press the
button.
When water is dispensed correctly, press the
“ button again to stop dispensing.
GXI/02
The
button turns on and the
and “
“ buttons blink.
• To prime the water circuit, place a container
below the steam wand.
Turn the hot water / steam knob clockwise
to its limit stop.
When the
“ button turns o , rotate the
switch counter-clockwise to set it back to its
former position.
Note (for all the machine models): After priming the
water circuit, it is recommended to use the same
procedure to dispense an entire water tank. At the end of this
operation,  ll the tank again with fresh drinking water.
INSTALLATION
Stand-by
The machine is designed for energy saving.
The machine automatically goes into stand-
by mode after 1 hour of inactivity.
When the machine is in standby mode, the
“ button blinks slowly, while the other
buttons are o .
To turn the machine on again simply press the
“ button.
It is possible to manually activate the stand-by function by pressing
the “
“ button.
Note (for all the machine models): When restarting
the machine, brew once without capsule to optimize
the system.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggia GXI - for Illy at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggia GXI - for Illy in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info