22873
40
Zoom out
Zoom in
Previous page
1/49
Next page
40
ENGLISH
10 - MAINTENANCE AND USEFUL
ADVICE
In order to ensure that the spouts (B) are kept clean and free of any
coffee deposits which may jeopardize yield, we advise that before
starting work in the morning that you put filter holder (D) in with
empty filter (while machine is hot) and operate the unit several times.
In this way any coffee dust which may have been deposited between
the metal filter (B) and the metal filter holder (A) are removed. This
operation must be repeated every day.
Frequently check the filter holes (C) and remove any deposits.
Should the water have been left in the ducts for a long time, it is
necessary to allow some water to flow through them in order to
remove any deposits.
It is a good idea to rinse the filters (C) and filter holders (D) every
day in hot water, or even better, place them in hot water and allow
to soak for the whole night in order to dissolve any greasy coffee
deposits.
It is advisable to leave the filter-holder cups inserted with the coffee
dregs for the entire working day to ensure that the filter-holder is
always at optimum temperature.
Do not cover the cup-warmer level with any fabrics or cloths etc.
Do not use any abrasive or corrosive products for cleaning the
bodywork.
The steam nozzles must be cleaned immediately after use in order
to prevent the risk of the formation of any scale which may block
the holes and to ensure that any drinks made subsequently do not
absorb any unpleasant odours.
A SPOUT HOLDER
B SPOUT
C FILTER
D FILTER HOLDER
E SEAL
F UNIT COFFEE
G CENTRAL SCREW
H ALLEN SCREWS
Weekly cleaning operations
Cleaning of the unit and spouts: place a teaspoon of specific coffee
machine washing powder into the blind filter supplied with the
machine and apply to the unit to be cleaned using the filter-holder.
Press the unit delivery control button as for a normal coffee
dispensing operation. Suspend delivery after 30 seconds and then
repeat the operation 3-4 times. Rinse out the unit using a normal
filter and then undertake a few dispensing operations using water
only. Then prepare a coffee in order to eliminate any unpleasant
odours.
Below-cup seal replacement
Seal (E) needs to be replaced in the event that coffee leakage is
noted between unit (F) and filter-holder (G), or in the event that on
closing filter holder (D) the unit centre is greatly exceeded.
Remove the spout (B) by loosening the central screw (G).
Remove the spout holder (A) by loosening the two Allen screws
(H).
Then proceed to remove seal (E) using a screw driver.
After removing the seal undertake to clean the slot and then re-
assemble the new seal taking care to insert it with the chamfered
part turned upwards towards the unit itself.
Fig.10.01
E
F
A
H
G
C
D
B
H
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggia E90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggia E90 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info