22873
33
Zoom out
Zoom in
Previous page
1/49
Next page
33
ENGLISH
On pressing key T1 coffee delivery begins,
once the required amount of coffee is
obtained press key T1 again or any other of
the keys of the unit keyboard in order to
suspend coffee delivery. The new impulse
value of the measure is thereby memorized
on the EPROM.
Both the solenoid valve and the pump are
de-activated thereby suspending product
delivery and all the keyboard leds go out.
To proceed with a new programming
operation of other coffee measures T2-T3-
T4 (providing that the programming time out
time of 30 sec is not exceeded) simply
repeat the same operations with the same
sequence as undertaken for key T1.
Press key T5 to immediately escape from
the programming stage.
IMPORTANT: Should the “PRE-INFUSION”
function be active (see par. 7.5). Wait until
the pre-infusion function is complete before
stopping delivery in progress.
NOTE: During the programming of a unit the
function of the other units is deactivated as
well as tea dispensing.
To programme the other units, press the
specific programming key of each unit and
carry out the same operations as
undertaken on unit 1. In this case any
variations in the measures are activated only
on the unit on which one is actually working.
Press the key corresponding to the measure
to be programmed (key T1 for example)
within 30 seconds (programming time-out).
The led relative to T5 will remain on, on all
keyboards and the led relative to the
measure being programmed will also come
on (on all the keyboards). During this state
and for the entire coffee measure
programming time duration, the solenoid
valve and pump are activated.
Note: If none of the keys are pressed within
30 seconds, it will automatically escape from
programming mode.
T5
T1
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggia E90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggia E90 in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info