507556
20
Zoom out
Zoom in
Previous page
1/80
Next page
• 20 •
4 Installation
For your own and other people safety, carefully follow
the "Safety Regulations" indicated in chapter 3.
4.1 Packaging
The original packaging has been designed and manufactured
to protect the machine during transport. We recommend
keeping the packaging material for possible future transport.
4.2 Installation Precautions
Do not move the machine by grabbing the cup
protection grilles.
Before installing the machine, read the following safety pre-
cautions carefully:
Place the machine in a safe place.
Make sure children cannot play with the machine.
Do not place the machine on hot surfaces or near open
 a m e s .
The co ee machine is now ready to be connected to the electric
network.
Note: we recommend washing the components
before using them for the  rst time and/or af-
ter they have not been used for a certain period of time.
4.3 Water tank
1
Remove the water tank (5).
2
Rinse it and  ll it with fresh drinking water, making
sure that the (MAX) level indicated in the tank is not ex-
ceeded.
Fill the tank only with fresh, non-sparkling,
drinking water. Hot water or any other liquid
may damage the tank. Do not operate the machine
when the water level in the tank is below the MIN
threshold. Make sure there is enough water in the wa-
ter tank.
Insert the water tank back into its seat in the co ee ma-
chine and make sure that it locks into place - its pro le
should adhere to that of the co ee machine.
Note: the water level can be checked looking
through the window on the front side of the
tank.
4.4 Machine Connection
Electric power may be very dangerous! It is
therefore necessary to strictly follow the safety
regulations. Do not use faulty power cords. Faulty cords
and plugs must be replaced immediately by Authorised
Service Centres.
The voltage of the appliance has been pre-set by the manu-
facturer. Check that the voltage matches the indication on the
data plate at the bottom of the appliance.
3A
Insert the plug into the socket on the back of the ma-
chine.
3B
Insert the other end of the plug into a wall socket with
suitable power voltage.
4.5 First Use
At  rst start-up, the co ee machine circuit must be primed.
4
Press the ON/OFF button (11): the " " light (12) turns on
and the "
" (14), " " (20) and " " (18) lights blink,
prompting the user to prime the circuit.
5
Place a container under the steam wand (Pannarello).
Open the "hot water/steam" knob (3) by turning it clock-
wise. The pump is activated automatically. Wait until
a steady jet of water  ows out of the steam wand (Pan-
narello).
6
Close the "hot water/steam" knob (3) by turning it coun-
ter-clockwise. Remove the container.
The machine begins the warm-up phase only after the water
circuit has been correctly primed.
Note: if the knob is left open, the pump is auto-
matically disengaged after a few seconds and
the "
" light (20) starts blinking.
4.6 Circuit Priming
When the water tank is empty, the machine circuit must be
primed again.
Note: if the machine has been operating with-
out water for a lot of time and the "
" (14), "
" (20) and " " (18) lights are blinking, please refer
to the "Troubleshooting" table.
5
Place a container under the steam wand (Pannarello).
Open the "hot water/steam" knob (3) by turning it clock-
wise. The pump is activated automatically.
Wait until a steady jet of water  ows out of the steam
wand (Pannarello).
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggia Carezza Deluxe - RI8525 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggia Carezza Deluxe - RI8525 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggia Carezza Deluxe - RI8525

Gaggia Carezza Deluxe - RI8525 User Manual - Dutch, Danish, Swedish, Norwegian, Finnish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info