718547
31
Zoom out
Zoom in
Previous page
1/94
Next page
31
English
Problem Cause Solution
The brew group cannot
be inserted.
The brew group is not in the correct
position.
The brew group has not been positioned
correctly before being placed back. Ensure that
the lever is in contact with the base of the brew
group and that the hook of the brew group is
in its correct position. See the "Reinserting the
brew group" chapter.
To reset the machine: put the coffee pucks
container back in place. Do not insert the brew
group. Close the service door with the coffee
pucks container inserted, then unplug and plug
in the power cord. Then try to reinsert the brew
group and switch on the machine.
The espresso does not
have enough crema or it
is watery.
The coffee grinder is set to a
coarse grinding.
Adjust the coffee grinder to a ner setting.
The machine is performing the self-
adjustment.
Dispense several cups of coffee so that the
machine regulates itself automatically.
The coffee outlet duct is clogged. Clean the coffee outlet duct with a spoon as
described in the "Cleaning the brew group
under running water" chapter.
The coffee dispensed is
not hot enough.
The set temperature is too low.
Check the menu settings.
Set the menu temperature to "MAX".
The machine grinds the
coffee beans, but the
coffee is not dispensed.
The coffee grinder is set to a too
ne grinding.
Adjust the coffee grinder to a coarser setting.
The coffee dispensing spout is
blocked.
Dispense a long coffee from pre-ground coffee
but without actually adding pre-ground coffee.
The nozzles of the coffee
dispensing spout are blocked.
Clean the nozzles of the coffee dispensing
spout with a small bottlebrush.
Coffee is dispensed
slowly or by drips.
The coffee grinder is set to a too
ne grinding.
Adjust the coffee grinder to a coarser setting.
The nozzles of the coffee
dispensing spout are blocked.
Clean the nozzles of the coffee dispensing
spout with a small bottlebrush.
The machine circuit is clogged by
limescale.
Descale the machine.
The milk does not froth. The milk dispensing spout is dirty
or the carafe has not been inserted
correctly, or the milk carafe has not
been assembled with all its parts.
Clean the carafe according to the "Accurate
cleaning of the milk carafe under running
water" chapter and ensure that it is positioned
and inserted correctly.
Ensure that all components have been
correctly assembled.
The type of milk used is not
suitable for foaming.
The amount and the quality of froth vary
depending on the type of milk.
CADORNA Prestige EN-NL-PL.indd 31 04/07/2019 13:54:24
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggia Cadorna Prestige - RI9604 SUP 049EU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggia Cadorna Prestige - RI9604 SUP 049EU in the language / languages: English, Dutch, Polish as an attachment in your email.

The manual is 24,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggia Cadorna Prestige - RI9604 SUP 049EU

Gaggia Cadorna Prestige - RI9604 SUP 049EU User Manual - German, French, Italian - 94 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info