703003
8
Zoom out
Zoom in
Previous page
1/44
Next page
8
Operation
Before first use
Please observe the following notes before frying on
your new appliance for the first time:
1 Thoroughly clean the appliance and accessories.
2 Heat up the appliance to 200°C for a few minutes.
This will eliminate any ‘newness’ smells and soiling.
Switching on
Press down the temperature control knob and turn it left
or right to the required temperature between 120
240°C.
It is possible to switch on only the front or rear frying
zone with the left control knob if you do not want to use
the whole frying surface. Press down the left control
knob and select the required frying zone Q or R.
The luminous disc behind the temperature control knob
flashes. When the temperature is reached, the luminous
disc lights constantly.
After heating up, coat the frying surface with a little oil
or fat with the spatula or a heat-resistant brush (e.g. a
silicone brush). Put the food directly – without pots or
pans – on the frying surface. Use the included spatulas
to turn the food.
Switching off
Turn the control knob to 0.
m Risk of burns!
When the appliance cover is closed, heat will
accumulate. Only close the appliance cover when the
appliance has cooled down. Never switch the appliance
on with the appliance cover closed. Do not rest food on
the appliance cover or use it to keep food warm.
Residual heat indicator
The luminous disc behind the right control knob flashes
after switching off, to indicate that the appliance has
still not cooled down to such an extent that it can be
touched safely.
Keeping warm setting
The keeping warm level enables you to keep food warm
after frying.
Turn the temperature control knob to the keeping warm
setting
£ . Use the left control knob to select the whole
frying surface or only the front or rear frying zone.
Safety shut-off
For your protection the appliance features safety shut-
off. Every heating operation is switched off after four
hours if the appliance is not operated during this time or
after a power cut. The luminous disc behind the
temperature control knob flashes.
Turn the temperature control knob to 0. Then you can
operate the appliance again normally.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau VP414111 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau VP414111 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau VP414111

Gaggenau VP414111 User Manual - German, Dutch, French, Italian - 44 pages

Gaggenau VP414111 Installation Guide - All languages - 24 pages

Gaggenau VP414111 Installation Guide - All languages - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info