761960
11
Zoom out
Zoom in
Previous page
1/48
Next page
10
Fan flap
mRisk of burns!
The appliance will become hot during operation. Only
touch the fan flap on the marked area.
The ventilation elements can be opened and closed
independently of each other. Open the fan flaps above
whichever hotplates are being used.
Note: At least one fan flap must be open before the fan
will switch on.
Opening a fan flap
1Press the area marked " on the fan flap.
2This will unlock the fan flap and it will swing out to
the left.
Closing a fan flap
1Swing the fan flap to the right.
2Press the area marked " on the fan flap.
This will lock the fan flap.
Ventilation moulding
If the downdraft ventilation operates beside a gas-fired
appliance, a ventilation moulding AA 414 010 must be
attached when cooking. The ventilation moulding
improves the extraction behaviour for gas-fired
appliances. The ventilation moulding prevents small
flames from going out as a result of a draft.
Cleaning
mRisk of burns!
The appliance becomes hot during operation. Allow the
appliance to cool down before cleaning.
mRisk of electric shock!
Do not use any high-pressure cleaners or steam
cleaners, which can result in an electric shock.
mRisk of injury!
Components inside the appliance may have sharp
edges. Wear protective gloves.
Caution!
Risk of surface damage: Do not use these cleaners
harsh or abrasive cleaning agents
oven cleaners
corrosive or aggressive cleaners, or those
containing chlorine
cleaning agents with a high alcohol content
hard and scratchy sponges, brushes or scouring
pads
If such an agent comes into contact with the appliance,
wash it off immediately with water.
Thoroughly wash out new sponge cloths before using
them!
11
Cleaning the appliance
Note: Before cleaning the appliance, remove any
jewellery you are wearing on your arms and hands.
Clean the appliance after each use once it has cooled
down. Remove boiled-over liquids immediately and do
not allow any food remains to dry on.
Remove fan flaps for cleaning.Clean fan flaps and
positioning plates in the dishwasher. Also clean the
inside of the hob extractor system regularly.You can use
a special degreaser to remove stubborn dirt (article no.
00311297).
Removing and refitting the metal
grease filter
Removing the metal grease filter
1Lift the fan flap to the middle position and then pull
it up to remove it. The fan flap will unclip from the
holder.
Note: Risk of scratching when removing and setting
down.Lift the fan flap straight out – do not tilt it
when doing so.
2Lift the metal grease filter out of the appliance.
Remove the positioning plate (if inserted).
3Clean the metal grease filter and positioning plate.
4Clean the inside of the hob extractor system.
Appliance part/
surface
Recommended cleaning
Stainless-steel
surfaces
Use soapy water and dry with a soft cloth.
Only use a minimal amount of water when
cleaning so that no water enters the appli-
ance.
Soak dried-on remains with a small amount
of soapy water; do not scour.
Use our stainless-steel cleaner (article no.
00311499) to remove stubborn food rem-
nants, yellowing brought about by heat, or
small rust spots appearing on the fan flap
as a result of cleaning in the dishwasher.
Controls The soapy cloth must not be too wet. Dry
with a soft cloth.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau VL414111 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau VL414111 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 2,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info