760873
26
Zoom out
Zoom in
Previous page
1/32
Next page
26
en Cookware test
Connecting directly
Note: If you connect your hob directly to the extractor
hood, it can no longer be connected to your home
network as well and you can no longer use Home
Connect.
1Carry out the following operating steps one after
the other without interruption.
2Push in one of the control knobs and turn it anti-
clockwise to position Ž.
3Turn the control knob clockwise to position ª
or ¹.
4Turn the control knob anti-clockwise to position 0.
The illuminated ring on the control knob lights up
blue.
5Turn the control knob clockwise to position ª
or ¹.
On the control panel, ••’ and ’‹¯‚ are
displayed alternately. The illuminated ring on the
control knob flashes blue. The hob is now ready for
registration in the home network.
6You have two minutes to initiate the connection on
the extractor hood. For more information, refer to
the section entitled "Connecting to the hob" in the
instruction manual for your extractor hood.
The connection process may take a few minutes.
The hob is connected to the extractor hood once
˜‘‚ lights up on the control panel and the
illuminated ring on the control knob lights up green.
The Ö symbol is displayed on the hob's control
panel.
Save the connection and exit the settings menu
1Carry out the following operating steps one after
the other without interruption.
2Push in the control knob and turn it anti-clockwise
to the Ž position.
3Turn the control knob clockwise to position ª
or ¹.
4Turn the control knob anti-clockwise to position 0.
The illuminated ring on the control knob goes out.
Control the hood via the hob
In the Home Connect app, you can adjust the behaviour
of your extractor hood depending on whether the hob or
individual cooking zones are switched on or off.
t
Cookware test
Cookware test
This function can be used to check the speed and
quality of the cooking process depending on the
cookware.
The result is a reference value and depends on the
properties of the cookware and the hotplate being used.
1Fill the pan with approximately 200 ml water and
place it at room temperature in the middle of the
hotplate that most closely matches the diameter of
the pan base.
2Go to the basic settings and select the ™„ setting.
‹”” will be lit.
3Touch the @ or A symbol. ‹¯ will be lit. A signal
tone will sound and the hotplate indicators will be
lit.
The function has now been activated.
¥—¯ will be lit. After a few seconds, the hotplate
displays will show the results for the quality and speed
of the cooking process.
Check the result using the following table:
To activate the function again, select the @ or A symbol.
Result
The cookware is not suitable for the hotplate and will
therefore not heat up.*
The cookware is taking longer to heat up than expected
and the cooking process is not going as well as it
should.*
ƒThe cookware is heating up correctly and the cooking
process is going well.
* If there is a smaller hotplate available, test the cookware
again on the smaller hotplate.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau VI422104 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau VI422104 in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau VI422104

Gaggenau VI422104 User Manual - German - 32 pages

Gaggenau VI422104 User Manual - Dutch - 32 pages

Gaggenau VI422104 User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info