760912
12
Zoom out
Zoom in
Previous page
1/36
Next page
12
en Operating the appliance
1
Operating the appliance
Operating the appliance
This chapter explains how to set a hotplate. The table
shows heat settings and cooking times for various
meals.
Applying hotplate settings
Use the control knob to select the heat setting you
require.
Note: Only use cookware with a suitable diameter. The
base of the cookware should not protrude over the
marked cooking zones.
Notes
To protect the fragile parts of your appliance from
overheating and electrical overloading, the hob may
temporarily reduce the power.
In order to prevent the appliance from producing
excess noise, the hob may temporarily reduce the
power.
Selecting a heat setting
Push in the control knob and turn it to the heat setting
you require.
The selected heat setting will be lit on the hotplate
display. The illuminated ring around the control knob
will be lit.
Switching off a hotplate
Turn the control knob to position 0.
The residual heat indicator will be lit and the illuminated
ring around the control knob will flash until the hotplate
has cooled down.
Note: If there is no cookware on the hotplate or if the
cookware is not detected, the selected heat setting will
flash and the illuminated ring around the control knob
will be lit orange. After approximately 9minutes, the
hotplate will switch off.
In this case, the illuminated ring around the control
knob will flash. Turn the control knob back to position 0;
the illuminated ring will stop flashing.
Changing the shade of orange for the illuminated
ring
The illuminated ring on the control knob lights up
orange during operation. You can choose between two
shades.
1Carry out the following operating steps one after
the other without interruption.
2Push in the control knob and turn it anti-clockwise
to Ž. Keep the control knob pressed in.
3Turn the control knob clockwise to position 1. Keep
the control knob pressed in.
4Turn the control knob anti-clockwise to position 0.
The t symbol will be lit. The illuminated ring
around the control knob will be lit yellow.
5Push in the control knob and turn it clockwise
to ¹.
After approx. five seconds, the illuminated ring
around the control knob lights up green. The colour
changes.
6To change the setting back, push in the control
knob in and turn it anti-clockwise to position 0and
then back to ¹.
The control knob lights up yellow.
7To save the setting, exit the menu in the same way:
Press the control knob in and turn it anti-clockwise
to Ž. Turn the control knob clockwise to position 1.
Turn the control knob anti-clockwise to position 0.
The illuminated ring around the control knob goes
out.
The settings have been saved.
0 Hotplate off.
Heat setting 1 Lowest setting
Heat setting 12 Highest setting

12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau VI414104 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau VI414104 in the language / languages: English as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau VI414104

Gaggenau VI414104 User Manual - German - 36 pages

Gaggenau VI414104 User Manual - Dutch - 32 pages

Gaggenau VI414104 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info