760913
25
Zoom out
Zoom in
Previous page
1/36
Next page
24
en Home Connect
Connecting the appliance to your
home network (Wi-Fi)
1Carry out the following operating steps one after
the other without interruption.
2Open the Home Connect settings menu.
~ "Opening or closing the Home Connect
settings menu" on page 23
The illuminated ring on the control knob lights up
blue.
Manual registration in the home
network
Note: To log in to the home network (Wi-Fi) manually,
you require the network name (SSID) and password
(key) for your home network.
1Turn the control knob clockwise to position ª
or ¹. After around 5seconds, the illuminated ring
around the control knob flashes blue and yellow
alternately. ’‹¯ ƒ is displayed on the control
panel.
The appliance is now in manual mode.
2Switch to the general settings menu of your mobile
device and call up the Wi-Fi settings.
On your mobile device, the "HomeConnect" Wi-Fi
connection is available for around 20minutes.
3Connect to the "HomeConnect" Wi-Fi connection
(password: "HomeConnect").
4Launch the Home Connect app on your mobile
device and follow the instructions for network login.
Enter the password (key) of the home network.
Following successful connection to the router, the
illuminated ring around the control knob lights up
green for around 3seconds. ˜‘‚ and Ö are
displayed on the control panel.
5The illuminated ring around the control knob
flashes blue and white alternately. The connection
to the mobile device is being established.
The appliance is available in the app on the mobile
device once the illuminated ring around the control
knob lights up green. If the illuminated ring around
the control knob lights up red, it was not possible to
establish a connection.
6To save the connection, exit the Home Connect
settings menu. ~ "Opening or closing the Home
Connect settings menu" on page 23
Connection to the router unsuccessful
1If a connection could not be established, check the
router and turn the control knob to another position
and then back to position ª or ¹.
The illuminated ring on the control knob lights up
blue. After around 5seconds, the illuminated ring
around the control knob flashes blue and yellow.
’‹¯ ƒ is displayed on the control panel.
2Switch to the general settings menu of your mobile
device and start the Wi-Fi connection again.
3Check that the password has been entered
correctly.
Connection to the mobile device unsuccessful
1If a connection could not be established, turn the
control knob to another position and then back to
position ª or ¹.
The illuminated ring on the control knob lights up
blue. After around 5seconds, the illuminated ring
around the control knob flashes blue and white.
˜‘‚ is displayed on the control panel.
2Launch the Home Connect app on your mobile
device and follow the instructions for automatic
network login.
Connecting more mobile devices to the same Home
Connect account
In the Home Connect app, you can connect more mobile
devices to your appliance.
25
Home Connect en
Connecting more mobile devices to another Home
Connect account
Prerequisite: A mobile device is connected to the
appliance. The appliance can be found in the Home
Connect settings menu.
1Turn the control knob to another position and then
back to position ª or ¹.
The illuminated ring around the control knob
flashes blue and white. ˜‘‚ is displayed on the
control panel. The appliance is now ready to
connect to another mobile device.
2Launch the Home Connect app on your mobile
device and follow the instructions for automatic
network login.
The appliance is available in the app on the mobile
device once the illuminated ring around the control
knob lights up green.
Logging in to your home network
automatically (WPS)
You require a router that has WPS functionality. You can
find information about this in the manual for your router.
You need to be able to access your router.
If this is not the case, follow the steps in ~ "Manual
registration in the home network" on page 24.
1Push in the control knob and turn it to position 1.
During the connection process, the illuminated ring
around the control knob flashes blue and yellow
alternately. ’‹¯‚ is displayed on the control panel.
2Press the WPS button on the router within the next
2minutes.
Following successful connection to the router, the
illuminated ring around the control knob lights up
green for around 3seconds. Then the illuminated
ring around the control knob flashes blue and white
alternately. ˜‘‚ is displayed on the control panel.
The appliance is now ready to connect to your
mobile device.
3Launch the Home Connect app on your mobile
device and follow the instructions for automatic
network login.
The appliance is available in the app on the mobile
device once the illuminated ring around the control
knob lights up green. Ö is displayed on the control
panel. If the illuminated ring around the control
knob lights up red, it was not possible to establish a
connection.
4To save the connection, exit the Home Connect
settings menu.
Connection to the router unsuccessful
1If a connection could not be established, check the
router and turn the control knob to another position
and then back to position 1.
The illuminated ring on the control knob lights up
blue. After around 5seconds, the illuminated ring
around the control knob flashes blue and yellow.
’‹¯ is displayed on the control panel
2Switch to the general settings menu of your mobile
device and start the Wi-Fi connection again.
Connection to the mobile device unsuccessful
1If a connection could not be established, turn the
control knob to another position and then back to
position 1.
The illuminated ring on the control knob lights up
blue. After around 5seconds, the illuminated ring
around the control knob flashes blue and white.
˜‘‚ is displayed on the control panel
2Launch the Home Connect app on your mobile
device and follow the instructions for automatic
network login.
Connecting more mobile devices to the same Home
Connect account
In the Home Connect app, you can connect more mobile
devices to your appliance.
Connecting more mobile devices to another Home
Connect account
Prerequisite: A mobile device is connected to the
appliance. The appliance can be found in the Home
Connect settings menu.
1Turn the control knob to another position and then
back to position 1.
The illuminated ring around the control knob
flashes blue and white. ’‹¯ is displayed on the
control panel. The appliance is now ready to
connect to another mobile device.
2Launch the Home Connect app on your mobile
device and follow the instructions for automatic
network login.
The appliance is available in the app on the mobile
device once the illuminated ring around the control
knob lights up green.
Exiting the Home Connect settings
menu
1Carry out the following operating steps one after
the other without interruption.
2Close the Home Connect settings menu.
~ "Opening or closing the Home Connect
settings menu" on page 23
The illuminated ring on the control knob goes out.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau VI 414 103 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau VI 414 103 in the language / languages: English as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau VI 414 103

Gaggenau VI 414 103 User Manual - Dutch - 32 pages

Gaggenau VI 414 103 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info