761861
15
Zoom out
Zoom in
Previous page
1/56
Next page
14
en Trouble shooting
Burner discolouration
After extended use, the brass burner parts take on a
darker colour as a result of the oxidation process that
occurs naturally. The discolouration does not affect
their serviceability.
Trouble shooting
Trouble shooti ng
mWarning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out by one of our trained after-sales engineers.
If the appliance is faulty, unplug the mains plug or
switch off the fuse in the fuse box. Contact the after-
sales service.
Faults often have simple explanations. Please read the
information in the table before calling the after-sales
service.
Fault Possible cause Solution
Malfunction of the
general electrical
system.
The household fuse has tripped. Check the fuse box if the fuse has tripped.
The electric ignition
does not work.
There may be food or cleaning products
stuck between the ignition sparkers and
the burners.
The space between the ignition sparker
and the burner must be clean.
The burners are wet. Dry the burner caps carefully.
The burner caps are not correctly
positioned.
Check that the burner caps are correctly
positioned.
Power cut Ignite the burner with a lighter or a match.
The burner flame is
not uniform.
The burner components are not correctly
positioned.
Ensure the components are correctly
positioned.
The grooves on the burner are dirty. Clean the grooves on the burner.
The gas flow is not
normal or there is no
gas.
The gas supply is blocked via gas taps. Open all gas taps.
If the gas is supplied from a gas cylinder,
check that this is not empty.
Change the gas cylinder.
The kitchen smells of
gas.
There may be a leak in the gas cylinder
coupling.
Check that the coupling is sound.
The burner goes off
after ignition.
The control knob was not held down for
long enough.
Once the burner is on, hold the control
knob down a few seconds longer. Fully
press control knob.
The grooves on the burner are dirty. Clean the grooves on the burner.
15
After-sales service en
After-sales service
After- sales service
Our after-sales service is there for you if your appliance
needs to be repaired. We will always find an appropriate
solution, also in order to avoid after-sales personnel
having to make unnecessary visits.
E number and FD number
When calling us, please quote the full product number
(E no.) and the production number (FD no.) so that we
can provide you with the correct advice. The rating plate
that features these numbers can be found on the
underside of the appliance.
To save time, you can make a note of the numbers for
your appliance and the telephone number of the after-
sales service in the space below in case you need them.
Please note that a visit from an after-sales service
engineer is not free of charge in the event that the
appliance has been misused, even during the warranty
period.
Please find the contact data of all countries in the
enclosed customer service list.
To book an engineer visit and product advice
Trust the expertise of the manufacturer, and rest
assured that the repair will be carried out by trained
service technicians using original spare parts for your
domestic appliance.
E no. FD no.
After-sales service O
GB 0344 892 8988
Calls charged at local or mobile rate.
IE 01450 2655
0.03 € per minute at peak.
Off peak 0.0088 € per minute.
AU 1300 368 339
NZ 09 477 0492
=1U)'(1U
7\SH
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau VG231220DE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau VG231220DE in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 2,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau VG231220DE

Gaggenau VG231220DE User Manual - German, Dutch, French, Italian - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info