334803
6
Zoom out
Zoom in
Previous page
1/36
Next page
6
Burner assembly
Always assemble the burner parts correctly and evenly
to avoid faults during ignition or during use. The
catching pins on the burner ring must fit in the
corresponding holes on the burner head.
Burner assembly normal / high output burner
Operation
The markings on the control knob show the setting
between high and low heat. The flame setting is
infinitely variable between high and low heat.
Notes
Only light a burner if all pan supports and burner
parts are properly assembled.
Make sure the burners and ignition sparkers are
clean and dry.
Fully press down the control knob and keep it
pressed, then turn it to the required position.
After igniting, keep the control knob pressed for
around 2 to 4 seconds more. The thermal sensor
which controls the gas flow must be heated
before the knob can be released.
If the flame should not ignite within 2 to 4
seconds, turn the control knob further to the left
to the low heat position and then back to the high
heat position after ignition. It is often faster to
ignite the burner in the low heat position because
the various gases have a differing ignition
response.
Only use the recommended accessories. Do not
cover the stainless steel cooktop base (e.g. with
aluminium foil).
Switching on automatically
Your cooktop features ignition sparkers for automatic
ignition.
1 Place a suitable pot or pan on the corresponding
cooking position.
2 Fully press down the corresponding control knob
and turn it anticlockwise to the required position.
The burner lights automatically.
3 Keep the control knob pressed for a few seconds
after ignition.
The flame size can be set continuously between high
and low by slowly turning the control knob.
Switching on manually
During a power cut you can ignite the burners
manually.
1 Place a suitable pot or pan on the chosen burner.
2 Press the corresponding control knob and turn it
anticlockwise to the required setting. Keep the
control knob pressed.
3 Use a gas lighter or a match to ignite the burner.
Keep the control knob pressed for a few seconds
after ignition.
Switching off
Turn the corresponding control knob clockwise to the
OFF position.
Thermoelectric flame monitoring
For your safety, this cooktop features thermoelectric
flame monitoring. This prevents gas escaping, if a
burner accidentally goes off during use (for example
from a draught).
Should a burner accidentally go off during use, turn
the control knob to the OFF position and wait at least
30 seconds before re-igniting the burner.
EXUQHUOLG
EXUQHUKHDG
VSDUNHU
KHDWVHQVRUIRU
IODPHPRQLWRULQJ
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau vg 232 132 f at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau vg 232 132 f in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau vg 232 132 f

Gaggenau vg 232 132 f User Manual - German, Dutch, French, Italian - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info