708098
17
Zoom out
Zoom in
Previous page
1/34
Next page
17
Operating the appliance en
Setting the signal tone volume
You can adjust the volume level of the signal tones
generated e.g. with alarms.
1Press à button to open the main menu.
2Press B button to move to the menu item Basic
settings.
3Press button to open the menu item.
4Press C button to move to the menu item Signal
tone volume.
5Press % button to open the menu item.
6Press B C buttons to select the required setting.
7Press button.
The setting is saved.
8Press ' button to exit the menu.
Switching the water filter counter on
and off
If you have replaced the particle filter with a water filter,
switch the water filter counter on. This will remind you to
replace the water filter in good time.
1Press à button to open the main menu.
2Use B button to move to the Basic settings menu.
3Press button.
4Use C button to move to the menu item Water filter
counter.
5To change the setting, press % button.
6Select the required setting.
7Confirm the selection by pressing button.
Dimming when door is opened and
closed
If dimming is switched on, the light will slowly become
brighter when the door is opened, and then slowly
darker when it is closed.
Switching dimming on or off when opening and
closing the door
1Press à button to open the main menu.
2Press B button to move to the menu item Basic
settings.
3Press button.
4Press C button to move to the menu item Dimming
when opening and closing the door.
5Press % button.
6Press C button to move to the menu item On or
Off.Press button to confirm.
Ice and water dispenser light
Use this function to set how long the light will illuminate
the ice and water dispenser.
Setting ice and water dispenser light
1Press à button to open the main menu.
2Press B button to move to the menu item Basic
settings.
3Press button to open the menu item.
4Use C button to move to the menu item Ice and
water dispenser light.
5Press % button to open the menu item.
6Press C button to select the required duration.
7Press button.
The setting is saved.
8Press ' button to exit the menu.
Ice and water dispenser proximity
sensor
When the proximity sensor is switched on, the ice and
water dispenser light switches on automatically as soon
as a glass is held underneath.
Switching proximity sensor on or off
1Press à button to open the main menu.
2Press B button to move to the menu item Basic
settings.
3Press button to open the menu item.
4Press C button to move to the menu item Motion
sensor.
5Press % button to open the menu item.
6Press B C buttons to move to the required setting.
7Press button.
The setting is saved.
8Press ' button to exit the menu.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau RY492304 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau RY492304 in the language / languages: English as an attachment in your email.

The manual is 2,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau RY492304

Gaggenau RY492304 Installation Guide - All languages - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info