762056
21
Zoom out
Zoom in
Previous page
1/30
Next page
21
Home Connect en
Connecting the refrigerator to the
Home Connect app
Use this menu to connect your refrigerator to mobile
devices.
1Install the Home Connect app on your mobile
device and log in or register.
2Open the Home network menu on your refrigerator.
3Press C button to move to the menu item Connect
to app.
4Press % button to open the menu item.
5Confirm the message to display the refrigerator in
the app.
6Open the app and wait until the refrigerator is
displayed.
Use Add to confirm the connection between the
app and the refrigerator.
If the refrigerator is not displayed automatically,
click on Add appliance in the app and follow the
instructions. As soon as your refrigerator is
displayed, add it with +.
7Follow the instructions in the app until the process
is complete.
Installing updates for the Home
Connect software
The refrigerator checks at regular intervals whether
updates are available for the Home Connect software.
If an update is available, a small à exclamation mark
appears on the á button.
Installing the update:
1Press á button.
The special menu Home network note opens.
2Press button to open the menu item.
A note window with the necessary steps for
installing the new software appears.
3To close the note window, press button.
4Open the Home network menu on your refrigerator.
~ "Setting up Home Connect" on page 20
5Press C button to move to the menu item Software
update.
6Press % button to open the menu item.
Note: The % button is only visible if an update is
available.
Installing new software.
7A note appears as soon as installation is complete.
8Press button to close the note.
Customer Service access
If you contact Customer Service, they can access your
appliance and view its status after you have given your
consent. You need to have your appliance connected to
your home network in order to do this.
Further information about Customer Service access and
its availability in your country is available under
www.home-connect.com in the Help & Support area.
1Contact Customer Service.
~ "Customer Service" on page 29
2Confirm the start of Customer Service access in
the app.
During Customer Service access, the
symbol Ù appears on the control panel.
3As soon as Customer Service has obtained the
necessary data, they will end their access.
Note: You can interrupt remote diagnostics early by
switching off Customer Service access in the Home
Connect app.
Delete network settings
If there is a problem when trying to establish a
connection or if you would like to register the appliance
in a different WLAN home network (Wi-Fi), the Home
Connect settings can be reset.
1Open the Home network menu on your refrigerator.
2Press C button to move to the menu item Delete
network settings.
3Press % button to open the menu item.
4Confirm the message to delete the network
settings.
To reconnect the appliance to the WLAN home network
(Wi-Fi), perform initial setup again.
~ "Setting up the connection to the home network"
on page 20
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau RF471304 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau RF471304 in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info