762056
15
Zoom out
Zoom in
Previous page
1/30
Next page
15
Operating the appliance en
Switching ice cube production on or
off
Caution!
Damage to the appliance!
Never store bottles or food in the ice cube container,
even for short periods. This can block and damage the
ice maker.
Ice cube production starts as soon as the appliance has
reached the set temperature.
Note: Ice cube production stops automatically when the
ice cube container is full.
Switching ice maker on or off
1Press à button to open the main menu.
2Use C button to move to the menu item Ice cube
production.
3Press I/& button.
Eco mode
Eco mode switches the appliance to energy-saving
operation.
The appliance automatically sets the following
temperatures:
Freezer compartment: -16 /3 
Switching Eco mode on or off
1Press à button to open the main menu.
2Press C button to move to the menu item Eco
mode.
3Press I/& button.
The temperature is changed and the display shows the
new temperature. When Eco mode is switched off, the
recommended temperature is set.
Note: You can also switch Eco mode on or off by
adjusting the temperature with the A/@ buttons.
Reset water filter counter
If you are using a water filter in your appliance instead
of the particle filter supplied, you have to reset the water
filter counter whenever you have replaced the water
filter.
~ "Switching the water filter counter on and off"
on page 16
1Press à button to open the main menu.
2Use C button to move to the menu item Reset water
filter counter.
3Press button to confirm and confirm the query
again with button.
Note: If you cancel the query or take longer than
10 seconds to make an input, the water filter counter
will not be reset.
Self-test
This function can be used to start fault analysis on your
appliance.
~ "Appliance self-test" on page 29
Setting the brightness of the control
panel
1Press à button to open the main menu.
2Press B button to move to the menu item Basic
settings.
3Press button.
4Press % button to open the menu item Brightness.
5Press B C buttons to set the required brightness.
6Press button.
The setting is saved.
7Press ' button to exit the menu.
Setting up the display screen
You can choose between the settings Reduced and
Standard. With the setting Reduced only the
temperature and active special functions are displayed
on the control panel after a short period without
operation. If the touch fields are touched, all buttons
will be visible again.
With the setting Standard all buttons always remain
visible.
1Press à button to open the main menu.
2Press B button to move to the menu item Basic
settings.
3Press button.
4Use C button to move to the menu item Display
screen.
5Press % button.
6Press B C buttons to move to the required setting.
7Press button.
The setting is saved.
8Press ' button to exit the menu.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau RF471304 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau RF471304 in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info