708106
17
Zoom out
Zoom in
Previous page
1/26
Next page
17
Home Connect en
o
Home Connect
Home Connect
This appliance is Wi-Fi-capable and can be remotely
controlled using a mobile device.
Note: Wi-Fi is a registered trademark of the Wi-Fi
Alliance.
In the following cases, the appliance functions like a
refrigerator without a network connection and can still
be manually operated via the controls:
The appliance is not connected to a home network.
Home Connect service is not available in the
country in which the appliance is set up. For an
overview of the countries in which Home Connect is
available, see www.home-connect.com.
Note: Please observe the safety information in this
instruction manual. Ensure that this is also observed if
you operate the appliance via the Home Connect app
and are not at home when doing so.
~ "Safety instructions" on page 3
Follow the instructions in the Home Connect app as
well.
Setting up Home Connect
Notes
Wait at least 2 minutes after switching on the
appliance before setting up Home Connect. Only
then is internal appliance initialisation complete.
Observe the Home Connect supplementary sheet,
which is available with the instructions for
download under www.gaggenau.com. Enter the
E-number of your appliance in the search field.
To change the settings of your appliance with Home
Connect, you have to install the Home Connect app
on your mobile device.
Please observe the supplied Home
Connect documents for doing this.
Follow the steps specified by the app.
Home network menu
Here's how to open the Home network menu:
1Press à button to open the main menu.
2Press B button to move to the menu item Basic
settings.
3Press button to open the menu item.
4Press B button to move to the menu item Home
network.
5Press % button to open the menu item.
Note: The first time you open the menu, you will be
automatically guided through initial setup. Follow
the instructions on the control panel. For further
information, please also see the following chapters.
6Press B C buttons to select the required submenu.
7Press ' button to exit the menu.
The following submenus can be found in the Home
network menu:
Connecting
Connect to app
Software update
Delete network settings
Setting up the connection to the home network
The first time you open the menu, you will be
automatically guided through initial setup. Follow the
instructions on the control panel.
1Install the Home Connect app on your mobile
device.
2Open the Home network menu on your refrigerator.
3Open the app on your mobile device.
4Log in or register with the app if access is not yet
available.
5Check the router of your home network to see if a
WPS function is available for automatic connection.
6If this function is available, start automatic network
connection with button.
Follow the instructions on the control panel.
7Start manual network connection if this function is
not available, if you're not sure whether the function
is available or if automatic network connection fails.
The refrigerator temporarily generates its own
network for connecting the mobile device.
8Start manual network connection in the app of your
mobile device.
As soon as the refrigerator is connected to the mobile
device, a connection between the refrigerator and your
home network is established.
Note: If the connection cannot be established, check
whether there is sufficient reception.
~ "Verify signal strength" on page 17
Verify signal strength
The signal strength is displayed in the start window of
the Home network menu. The signal strength should be
at least 50 %. If the signal strength is too low, the
connection could be interrupted.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau RC492304 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau RC492304 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau RC492304

Gaggenau RC492304 User Manual - German - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info