26
Cleaning the appliance
ã Caution
▯ Do not use abrasive, chloride or acidic cleaning
agents or solvents.
▯ Do not use scouring or abrasive sponges. The
metallic surfaces could corrode.
▯ Never clean shelves and containers in the
dishwasher. The parts may become deformed!
Proceed as follows:
1. Before cleaning: Switch the appliance off.
2. Pull out the mains plug or switch off the fuse.
3. Clean the appliance with a soft cloth, lukewarm
water and a little pH neutral washing-up liquid.
The rinsing water must not run into the light.
4. Wipe the door seal with clear water only and then
wipe dry thoroughly.
5. Rinsing water must not run through the drainage
hole into the evaporation area.
6. After cleaning reconnect and switch the
appliance back on.
Interior fittings
All variable parts of the appliance can be taken out for
cleaning.
Take out glass shelves
Lift the glass shelves, pull forwards, lower and swing
out to the side.
Taking out pull-out container
Lift the container and pull out.
Condensation channel
To clean the condensation channel, take out the pull-
out container.
Regularly clean the condensation channel
and drainage hole with a cotton bud or similar
implement to ensure that the condensation can drain.