123476
8
Zoom out
Zoom in
Previous page
1/38
Next page
en
8
Filling in the Salt
Note
If the hardness of your mains
water corresponds to the
device’s index value
(see
chapter “Setting up the softening
system”), you do not need to fill
in the salt because the operation
will not use any salt. In case of
the settings “Hardness-Auto” and
to , salt must be filled in.
During the rinse cycle the salt is being
washed automatically from the salt
compartment into the softening system
where it will dissolve the lime.
The lime-containing solution drains from
the dishwasher. Afterwards the softening
system is ready to be loaded again.
This regeneration cycle will only work if
the salt is dissolved in water.
After switching on the device, lack of salt
is indicated by the display “Refill Salt”.
(This display will no longer appear once
you have set the softening system to the
value
.)
Open the screw-type cap of the
compartment
25 .
Before operating the device for the first
time you must pour 1 litre of water into
the salt compartment.
Then you must refill salt (not table salt)
using the supplied salt filling aid until the
salt compartment is full (max 1.5 kg).
When you refill the salt, water is being
displaced and drains off. Therefore the
refilling must take place shortly before
switching on the device. (In order to avoid
corrosion). This way the overflowing salt
solution is diluted and flushed immediately.
Then clean the filling area of salt residues
and screw the compartment lid back on
without tilting the lid.
As soon as a sufficiently high salt solution
has formed the display “Refill Salt” will
disappear.
If you do not want to wait until the display
disappears but you want to wash
immediately, confirm the refilling of the salt
using the button M/OK
2 .
If you do not want to refill the salt now you
can skip the display “Refill Salt” by
pressing the button M/OK
2 .
Do not pour detergent into the
container for special salt. This
would destroy the water
softener.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau gi 230-161 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau gi 230-161 in the language / languages: English as an attachment in your email.

The manual is 3,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau gi 230-161

Gaggenau gi 230-161 User Manual - German - 40 pages

Gaggenau gi 230-161 User Manual - Dutch - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info