3-stage programming
When simmering or defrosting foodstuffs in the
microwave, it is often the case that you require two
or three heat settings one after the other. It is
possible to program your microwave appliance to
implement such procedures automatically.
If you use a specific setting frequently, you can
store this setting in your microwave oven and
conveniently select it when required.
You can store five programs. Each program can
include up to three stages. All cooking methods
can be stored in any given order.
You can easily select a stored program, the
different stages will automatically run consecutively.
The total time of all the cooking stages is displayed,
and counted down in seconds and/or minutes.
The cooking time cannot be changed during
operation.
A stored setting can be changed or replaced at any
time with another setting.
Setting procedure
• Press the confirmation key and keep it pressed
until a signal is sounded. P1 is shown on the
display. Using the +/– keys you can now select the
desired storage number (P1 – P5).
• Repress the confirmation key and keep it pressed
until a signal is sounded. P11 is shown on the
display, i.e. the first storage number, the first
program stage. Now you can select the desired
setting for this program stage.
• The order of the setting is: cooking time >>
microwave power setting >> grill temperature.
Use the +/– keys to select the desired values, by
pressing the + and – at the same time you select
the value 0. Press the microwave key to access
the next menu step.
• Press the microwave key, when you have entered
all three values, in order to access the second
program stage. Now you can select the desired
setting for the second program stage.
• Press the microwave key, when you have entered
all three values, in order to access the third
program stage. Now you can select the desired
setting for the third program stage.
• Finally press the confirmation key and keep it
pressed until a signal is sounded, to store all
stages for this storage number. Press the cancel
key, in order to exit the programming mode.
Please note: the programming mode will
automatically end without storing any values, should
you interrupt programming it for a longer period of
time.
By pressing the grill key you can go one step back
in the programming, for example to change or to
check a value.
Selecting a stored program
• Press the confirmation key and keep it pressed
until a signal is sounded. P1 is shown on the
display. Using the +/– keys you can now select the
desired storage number (P1 – P5).
• Repress the confirmation key. The programm
starts automatically. The total cooking time of the
program is shown on the display.
You will find an example of a 3-stage-
programming on the next page.
4. Further functions
13
