329728
31
Zoom out
Zoom in
Previous page
1/36
Next page
30
– Press the or + key to change the duration of the
pyrolysis. You can choose between the following
times: 02:00, 02:30 and 3:00.
– Press the (Confirm) key to start pyrolysis. An
audible signal is sounded.
– For your safety, the oven door is locked
immediately. The locking and unlocking process
takes about 30 seconds. The (door lock)
symbol lights up during this time. The oven
lighting goes off. On the display, the (door
lock), (cooking time) and (pyrolysis)
symbols light up.
Do not try to open the oven door during the self-
cleaning process.
Note: during the pyrolysis process, it is not
possible to query the temperature value nor the
time.
End of pyrolysis:
After the pyrolysis process has ended, an audible
signal sounds and the (cooking time) symbol
flashes. Press any key and turn the “Temperature"
control knob to the 0 position and the “Mode" knob
to a position other than Pyrolysis.
Please note that, for safety reasons, the door will not
be unlocked until until the oven has cooled down to
150 °C. The door lock symbol goes off.
Wait until the oven has cooled down; then, you can
remove any pyrolysis residues (e.g. ash) from the
oven compartment.
Ending the pyrolysis process before expiry of
the entered time:
– Turn the “Temperature" control knob to the 0
position and the “Mode" control knob to a position
other than Pyrolysis.
– Pay attention to the fact that the door is not
unlocked until at a temperature of 150 °C or less.
Tip: wait until the appliance indicates that the
pyrolysis process has ended. This ensures that you
will achieve an optimum cleaning result.
Starting pyrolysis at a later time:
– Enter the required switch-off time (see
Chapter 3).
Turn the control knobs to the pyrolysis setting as
described above.
Note: you can query the current pyrolysis time by
pressing the (Timer) key. You can increase the
length of the pyrolytic cleaning process during
operation. Press the + key to increase the value
by 30 minutes in each case. Confirm the value by
pressing the (confirmation) key.
In this mode of operation (auto pyrolysis), even
stubborn soiling is burnt away at temperatures
around 485°C.
After the pyrolytic cleaning process, you can
remove the ash easily from the oven using a moist
cloth.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau eb 261 131 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau eb 261 131 in the language / languages: English as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau eb 261 131

Gaggenau eb 261 131 User Manual - German - 36 pages

Gaggenau eb 261 131 User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info