31
6.2 Self-cleaning
In this mode, soiling on the catalytic interior
plates (accessories) combusts at temperatures
around 300°C.
In the event of extreme soiling, coarse greasy
residues must be removed from the oven before
cleaning.
The non-catalytic parts such as the muffle base,
the door inside and the glass pane are not cleaned.
These parts must be cleaned beforehand.
Proceed as follows:
–
Remove all loose inside parts such as the grid
iron or the baking stone from the oven interior.
– Remove the grease filter. Push the grease filter up
and remove it from the oven interior.
– Close the oven door.
– Turn the “Mode" control knob to the (Grilling
with hot air) setting
– Turn the “Temperature" control knob to 300 °C.
– Enter a duration (see page 15). We recommend a
time of 1:30 h. You should modify the cleaning
time depending on the degree of soiling. The
setting should be at least 1 hour and no more than
2 hours.
The catalytic cleaning operation begins
immediately after you have set the timer.
The catalytic cleaning operation can also be started
automatically at a later time if you enter a switch-off
time.
You can display the current catalysis time by
pressing the (Timer) key.
Turn the temperature control knob back to the 0
setting after the self-cleaning process has ended.
