762099
24
Zoom out
Zoom in
Previous page
1/34
Next page
24
Fault, what to do?
Fault table
Fault Cause Remedial action
“Check water supply” display 8
lights up.
Supply hose kinked. Install supply hose without kinks.
Tap turned off. Turn the tap on.
Tap jammed or calcified. Turn the tap on.
Flow rate must be min. 10 l/min. when water
supply is open.
Filter in the water supply blocked. Switch off the appliance and pull out the mains
plug. Turn off the tap. Unscrew water connec-
tion.
Clean filter in the supply hose. Screw water
connection on again. Check for leaks. Recon-
nect power supply. Switch on the appliance.
Error code :‹ˆ is lit. Intake opening (on right inside of appli-
ance) covered by utensils.
Arrange utensils so that the intake opening is
not obstructed.
Error code :‚ƒ is lit. Heating element calcified or soiled. Clean appliance with dishwasher cleaning
agent or descaler. Operate the dishwasher
with water softening system and check the set-
ting (see chapter “Water softening system/
Special salt”).
Fault code :‚… is lit. Water protection system activated. Turn off tap.
Call customer service and mention the fault
code.
Fault code :‚† is lit.
Fault code :‚‡ is lit. Constant water inflow.
Error code :ƒƒ is lit. Filters 1j are soiled or blocked. Clean filters.
(see “Cleaning and maintenance”).
Error code :ƒ… is lit. Waste-water hose kinked or blocked. Install hose without kinks, remove any residue.
Siphon connection still sealed. Check connection to siphon and open if
required.
Cover on the waste water pump loose. Lock cover correctly.
(See “Waste water pump”)
Error code :Ġ is lit. Waste water pump blocked or cover on
the waste water pump is not locked in
position.
Clean pump and lock cover correctly. (See
“Waste water pump”)
Error code :ƒˆ is lit. Mains voltage too low. Not an appliance fault, have the mains voltage
and electrical installation checked.
A different error code is indicated
on the digital display.
(:‹‚ to :„‹)
A technical fault has probably
occurred.
Switch off appliances with the ON/OFF switch
(. After a short time restart the appliance.
If the problem recurs, turn off the tap and pull
out the mains plug.
Call customer service and mention the error
code.
Display flashes. Door not closed properly. Close the door. Ensure that no objects (uten-
sil, fragrance dispenser) are protruding over
the basket and preventing the door from clos-
ing.
Refill indicator for salt @ and/or
rinse-aid H is lit.
No rinse aid. Refill rinse aid.
No salt. Refill with special salt.
Sensor does not detect salt tablets. Use different special salt.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau DF250141 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau DF250141 in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info