123575
5
Zoom out
Zoom in
Previous page
1/23
Next page
5
Getting to know your appliance
Diagrams of the control panel and the interior of the
appliance can be found in the envelope at the front.
Individual positions are referred to in the text.
Control panel
1
Main switch
2
Door opener
3 Time delay
4
Digital display/
Programme progress indicator
5 Salt refill indicator
6
Rinse-aid refill indicator
7
Programme buttons
8
Additional functions *
* some models only
Appliance interior
20
Upper basket with 2-tiered cup rack
21
Additional cutlery basket for the top basket *
22
Upper spray arm
23
Lower spray arm
24
Container for special salt with level indicator *
25
Filters
26
Cutlery basket
27
Lower basket
28
Lock for detergent dispenser
29
Container for rinse-aid, with level indicator
30
Detergent compartment
31
Nameplate
* not on all models
You will need to purchase the
following before using the dishwasher
for the first time:
special salt for use in dishwashers
– detergent
– rinse-aid
Only use products, which are suitable for dishwashers.
Water softener
In order to rinse dishes and glasses satisfactorily, the
dishwasher requires soft water, i.e. containing little or
no lime, otherwise water stains will be left behind on
crockery and glasses, etc.
If the tap water exceeds a certain level of hardness, it
must be softened, i.e. decalcified, so that it can be
used in the dishwasher.
This is achieved by adding a special salt to the water
softener inside the dishwasher.
The water softener, that is the required amount of salt,
is set up according to how hard the tap water is.
Setting up the water softener
Determine the level of hardness of your tap water.
Your local water company or service agent can help
you with this.
Identify setting from the following water hardness
table.
Water hardness table
Hold down programme button B and switch on the
1
main switch, then release both buttons.
The LED for button
B flashes and the digital
display displays the factory setting
.
To change the setting,
press programme button B .
Each time the button is pressed, the set value
increases by 1; after , the setting goes back to
.
Switch off the main switch
1
. The chosen setting
has now been stored.
Approx. 4 litres of water are required for regenerating
the water softening system. The overall water
consumption per load can therefore be increased by
between 0 and a maximum of 4 litres according to the
water hardness setting.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau df 461-160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau df 461-160 in the language / languages: English as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau df 461-160

Gaggenau df 461-160 User Manual - German - 23 pages

Gaggenau df 461-160 User Manual - Dutch - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info