127352

Gaggenau df 261 161 Manual

17
Zoom out
Zoom in
Previous page
1/28
Next page
17
Automatic switch off after end of
programme or interior light*
* depending on model
To save energy, the dishwasher can be automatically
switched off 1 min or 120 min after the programme
ends.
The setting can be selected from ˜:‹‹ to ˜:‹ƒ.
1 Open the door.
2 Switch on ON/OFF switch (.
3 Hold down programme button # and press
START button )" until •:‹...
is indicated on the digital display.
4 Release both buttons.
The LED for button # flashes and the digital
display 8 displays the factory setting •:‹….
5 Keep pressing programme button # until the
value ˜:‹... is indicated on the numerical display
8.
To change the setting:
1 Press programme button 3.
Each time the button is pressed, the set value
increases by one level; when the value of ˜:‹ƒ
has been reached, the display jumps back
to ˜:‹‹.
2 Press START button )".
The set value is saved.
3 Close the door.
Switching off the appliance
Short time after the end of the programme:
1 Open the door.
2 Switch off ON/OFF switch (.
3 Turn off the tap (not applicable if Aqua-Stop
fitted).
4 Remove the utensils when they have cooled down.
ã=Warning
At the end of the programme please open the door
fully and not partially when emptying the dishwasher.
Any escaping water vapour could damage sensitive
worktops.
Interrupting the programme
1 Open the door.
2 Switch off ON/OFF switch (.
The LEDs go out. The programme is saved.
If the door was opened on an appliance which has
a warm water connection or is heated, first leave
the door ajar for several minutes and then close.
Otherwise, expansion (pressure) may cause the
appliance door to spring open or water to run out
of the appliance.
3 To continue the programme, switch on the ON/
OFF switch ( again.
4 Close the door.
Terminating the programme (Reset)
1 Open the door.
2 Press START button )" for approx. 3 sec.
The numerical display 8 indicates ‹:‹‚.
3 Close the door.
The programme sequence lasts approx. 1 min. On
the digital display 8 is indicated ‹:‹‹.
4 Open the door.
5 Switch off ON/OFF switch (.
6 Close the door.
˜:‹‹ Appliance does not switch off automatically.
The interior light 1" comes on when the door
is opened irrespective of whether the ON/OFF
switch ( is switched on or off. When
the door is closed the light is off. If the door is
open for longer than 60 min., the light switches
off automatically. The interior light 1" is lit
only when the set value ˜:‹‹ is selected.
˜:‹‚ Appliance switches off after 1 min.
˜:‹ƒ Appliance switches off after 120 min.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau df 261 161 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau df 261 161 in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau df 261 161

Gaggenau df 261 161 User Manual - German - 30 pages

Gaggenau df 261 161 User Manual - Dutch - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info