760866
13
Zoom out
Zoom in
Previous page
1/56
Next page
12
en Getting to know your appliance
Cookware mode
The hob has various functions for the cooking position.
To access the cookware mode menu, tap the cooking
position display and then touch the i button.
Cooking position display
When you place an item of cookware on the cooking
surface, the indicator for the relevant cooking position
will light up on the touchscreen display.
Residual heat indicator
The hob has several residual heat indicators f to warn
you that one or more cooking positions is/are still hot.
One, two or all three bars of the indicator f will light up
depending on how strong the residual heat is. Do not
touch the cooking surface while the indicators are still
lit or immediately after they have switched off.
The residual heat indicators will remain lit for as long as
the cooking surface is still hot, even if you switch off the
hob.
Cookware mode Function
Ð Dynamic cooking
for an item of cookware
Allows a particular heat setting to
be selected based on the position
of the cookware by moving it from
front to back on the cooking sur-
face.
Ñ Classic cooking for
an item of cookware
Allows the heat setting for each
item of cookware to be selected on
the control panel.
¨ Cooking sensor You can use the cooking sensor
that is attached to the outside of the
pan to automatically keep the tem-
perature at a set level. Cooking sen-
sor mode is suitable for food that
requires large quantities of water,
oil or fat for boiling or deep-fat fry-
ing in the pan.
È Teppanyaki This enables the teppanyaki surface
to be divided into two sections. This
means you can fry food on one sec-
tion and keep food warm on the
other section, or use the entire area
to fry food at the same heat setting.
Cooking position detected
The cookware was detected on the cook-
ing position. The cooking position dis-
play lights up. Touch the # symbol to
select the cooking position.
Cooking position selected
The indicated cooking position has been
selected. You can now set the power
level.
Cooking position switched on
The indicated cooking position has been
switched on. The selected power level
lights up in the display.
There is no cookware on the cooking position
The cookware has been removed from
the cooking position. The selected
power level is dimmed.
Other indicators and symbols
The settings for the selected hotplate
cannot be configured.
For more information, touch the display.
Possible causes:
Up to five items of cookware evenly
distributed over the cooking surface
can be heated at the same time.
The cookware is not suitable for use
on an induction hob.
The appliance has exceeded its maxi-
mum power consumption.






K
PLQ







K
PLQ

13
Operating the appliance en
1
Operating the appliance
Operating the appliance
This chapter explains how to set a cooking position. The
table shows heat settings and cooking times for various
meals.
First-time use
When you switch on the appliance for the first time, the
menu for selecting the initial settings appears on the
display. Select the settings you require.
Once you have confirmed these settings, the main
screen will appear.
Note: You can change the settings at any time.For
information on how to select these settings, see the
section entitled ~ "Basic settings".
Switching the hob on and off
The main switch is used to switch the hob on and off.
To switch the hob on: Touch the # symbol. The
indicator above the main switch lights up. After a short
switch-on time, the hob will be ready for operation.
To switch the hob off: Touch the # symbol. The display
switches off. All the cooking positions are switched off.
The residual heat indicator will remain lit until the
cooking positions have cooled down sufficiently.
Notes
The hob will automatically switch off if the cooking
positions have been switched off for more than
30 seconds.
The settings are stored for 10 seconds after the
hob has been switched off. If you switch the hob
back on during this time, the option to confirm the
previous settings will appear on the main screen.
For information on this setting, see the section
entitled ~ "Basic settings".
Configuring cooking position settings
The required heat setting is selected in the settings
area.
Each heat setting has an intermediate setting ending in
.5.
Notes
To protect the fragile parts of your appliance from
overheating and electrical overloading, the hob may
temporarily reduce the power.
In order to prevent the appliance from producing
excess noise, the hob may temporarily reduce the
power.
Selecting a hotplate and heat setting
The hob must be switched on.
1Place the cookware on the cooking surface.
2Touch the # symbol for the cooking position on the
touchscreen display. The settings area will light up
on the cooking position display.
3Within the next 4 seconds, scroll up with your finger
and select the heat setting you require.
To select heat setting 9.0, tap 9.0 directly.
The heat setting is set.
Heat setting 1.0 = lowest setting
Heat setting 9.0 = highest setting
K
PLQ





13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau CX482111 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau CX482111 in the language / languages: English as an attachment in your email.

The manual is 3,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau CX482111

Gaggenau CX482111 Installation Guide - English, German - 26 pages

Gaggenau CX482111 User Manual - German - 56 pages

Gaggenau CX482111 Installation Guide - Dutch - 26 pages

Gaggenau CX482111 User Manual - Dutch - 56 pages

Gaggenau CX482111 Installation Guide - French, Italian, Polish, Portuguese, Swedish, Spanish - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info