761928
26
Zoom out
Zoom in
Previous page
1/56
Next page
26
en Wireless temperature sensor
Notes
If there is a fault with the cooking sensor, the
connection may not be established correctly for the
following reasons:
Bluetooth communication error.
The symbol on the cooking sensor was not
pressed within 30 seconds.
The battery in the cooking sensor is flat.
Reset the cooking sensor and repeat the
connection procedure.
If there are problems with the connection due to a
transmission error, repeat the connection
procedure.
If the display continues to indicate a connection
error, contact our technical after-sales service.
Resetting the wireless temperature sensor
1Touch and hold the ¨ symbol on the cooking
sensor for 8-10 seconds.
While you are doing this, the cooking sensor's LED
indicator will light up three times. When the LED
lights up for the third time, it will start to reset the
cooking sensor. Take your finger off the symbol
when this happens.
When the LED switches off, this means that the
wireless cooking sensor has been reset.
2Repeat the connection procedure.
Cleaning
Do not clean the wireless temperature sensor in the
dishwasher.
Temperature sensor
Clean the temperature sensor with a damp cloth. Never
clean it in the dishwasher. Do not immerse it in water or
clean it under running water.
Remove the temperature sensor from the saucepan after
cooking. Store it in a clean, safe place (such as in its
packaging) away from sources of heat.
Silicone patch
Clean and dry before attaching to the temperature
sensor. Dishwasher safe.
Note: Cookware with the silicone patch must not be left
to soak for long periods in soapy water.
Temperature sensor window
The sensor window must always be clean and dry.
Proceed as follows:
Remove dirt and oil splatters regularly.
Use a soft cloth or cotton buds and window cleaner
for cleaning.
Notes
Do not use abrasive cleaning agents such as
scouring pads, scrubbing brushes or cream
cleaners.
Do not touch the sensor window with your fingers.
This may make it dirty or scratch it.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau CX482110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau CX482110 in the language / languages: English as an attachment in your email.

The manual is 3,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info