761927
12
Zoom out
Zoom in
Previous page
1/56
Next page
12
en Getting to know your appliance
Cookware mode
The hob has various functions for the cooking position.
To access the cookware mode menu, tap the cooking
position display and then touch the i button.
Cooking position display
When you place an item of cookware on the cooking
surface, the indicator for the relevant cooking position
will light up on the touchscreen display.
Residual heat indicator
The hob has several residual heat indicators f to warn
you that one or more cooking positions is/are still hot.
One, two or all three bars of the indicator f will light up
depending on how strong the residual heat is. Do not
touch the cooking surface while the indicators are still
lit or immediately after they have switched off.
The residual heat indicators will remain lit for as long as
the cooking surface is still hot, even if you switch off the
hob.
Cookware mode Function
Ð Dynamic cooking
for an item of cookware
Allows a particular heat setting to
be selected based on the position
of the cookware by moving it from
front to back on the cooking sur-
face.
Ñ Classic cooking for
an item of cookware
Allows the heat setting for each
item of cookware to be selected on
the control panel.
¨ Cooking sensor You can use the cooking sensor
that is attached to the outside of the
pan to automatically keep the tem-
perature at a set level. Cooking sen-
sor mode is suitable for food that
requires large quantities of water,
oil or fat for boiling or deep-fat fry-
ing in the pan.
È Teppanyaki This enables the teppanyaki surface
to be divided into two sections. This
means you can fry food on one sec-
tion and keep food warm on the
other section, or use the entire area
to fry food at the same heat setting.
Cooking position detected
The cookware was detected on the cook-
ing position. The cooking position dis-
play lights up. Touch the # symbol to
select the cooking position.
Cooking position selected
The indicated cooking position has been
selected. You can now set the power
level.
Cooking position switched on
The indicated cooking position has been
switched on. The selected power level
lights up in the display.
There is no cookware on the cooking position
The cookware has been removed from
the cooking position. The selected
power level is dimmed.
Other indicators and symbols
The settings for the selected hotplate
cannot be configured.
For more information, touch the display.
Possible causes:
Up to five items of cookware evenly
distributed over the cooking surface
can be heated at the same time.
The cookware is not suitable for use
on an induction hob.
The appliance has exceeded its maxi-
mum power consumption.






K
PLQ







K
PLQ

12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau CX482100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau CX482100 in the language / languages: English as an attachment in your email.

The manual is 3,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info