761931
17
Zoom out
Zoom in
Previous page
1/20
Next page
17
Demo mode
If the °symbol appears in the display, the demo
mode is activated. The appliance does not heat up.
Disconnect the appliance from the power supply. Wait
a few seconds and reconnect it. Then switch off the
Demo mode in the Options menu within the first 3
minutes.
Info button
With the Info button, you can request important
additional information on the function currently being
used. To call up the information, touch the display
area. The information appears. To close the
Information, touch the G display area.
Normal operating noise of the
cooktop
Induction technology is based on the generation of
electromagnetic fields. These allow heat to be
generated directly on the base of the cookware. Pots
or pans can cause different noises or vibrations
depending on the manufacturing method. These
noises are described as follows:
Deep buzzing (as from a transformer)
This noise occurs when cooking on higher power
levels. It is due to the volume of energy transferred
from the cooktop to the cookware. The noise stops or
reduces when the power level is reduced.
Low whistling
This noise occurs if the cooking container is empty. It
stops when water or food is placed in the container.
Crackling
This noise occurs with cookware made of different
multilayer materials. It occurs because of vibrations at
the areas at which the different materials contact each
other. The noise occurs on the cookware and can vary
according to the volume and preparation method of
the food.
An audible signal sounds if there is an object on the touch
display.
Remove the object and acknowledge the indicator on the
display. You can now reset the hob.
The cookware is not detected. The cookware is outside the appropriate size. Sizes with a
diameter of 90 to 340 mm are suitable.
There may be liquid under the cookware. Ensure that the
base of the cookware is dry.
The cookware may not be suitable for induction cooking.
The hob switches off automatically If no hotplate is in operation on the hob and you do not
change the settings for a prolonged period of time, the hob
will automatically switch off.
The hotplate cannot be adjusted. Only 2 hotplates can be in operation on each side of the hob.
An item of cookware in the centre of the hob occupies one
hotplate on each side of the hob. You can only set one other
hotplate for each side of the hob.
The cookware may not be suitable for induction cooking.
The hotplate settings are not transferred when the cookware
is moved.
Move the cooking container more slowly over the hob or use
the transfer function.
The hob responds unusually or can no longer be operated
correctly.
Disconnect the appliance from the power supply. Wait a few
seconds and reconnect it.
Problem Remedy


,QIRUPDWLRQ
7RFKDQJHWKHSRZHUOHYHOWRXFKWKHQXPEHUVDQG
VOLGH\RXUILQJHUXSRUGRZQ
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau CX480110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau CX480110 in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info