761931
8
Zoom out
Zoom in
Previous page
1/20
Next page
8
Residual heat indicator
The cooktop has a residual heat indicator f for each
side of the cooktop, which indicates any cooking
positions that are still hot. Do not touch the cooking
positions or the side of the cooktop with this display.
Even if the cooktop is already off, f will stay lit for as
long as the cooking positions are still hot.
Setting the cooktop
This section informs you how to set the cooking
positions. The settings table shows power levels and
cooking times for various meals.
Switching the cooktop on and off
Use the main switch to switch the cooktop on and off.
To switch on: touch the # symbol. The indicator
above the main switch lights up. After a short
activation time, the cooktop is ready for operation.
To switch off: touch the # symbol. The indicator in
the display switches off. All cooking positions are
switched off. Hibernate mode is activated. See
section
Hibernate mode
.
The heat indicator remains lit until the cooking
positions have cooled down sufficiently.
Note: The cooktop switches off automatically if all
cooking positions have been switched off for more
than 60 seconds and you do not make any settings on
the touch display.
Hibernate mode
As soon as you switch off the hob, Hibernate mode is
activated for a set duration. The lamp above the main
switch flashes. Only after this duration has passed
does the hob switch off completely. During Hibernate
mode, you can switch the appliance on again using
the main switch. The appliance is immediately ready
for use.
Note: To find out how to change the duration of the
Hibernate mode, see section
Options menu
.
Setting a cooking position
Use the scroll function to set the desired power level.
Each power level has an intermediate level. This is
identified with x.5.
Note: To find out how to deactivate the intermediate
levels, see section
Options menu
.
Setting the power level
The cooktop must be switched on.
1Place cookware on the cooking surface.
2Touch the # symbol of the cooking position in
the display. 0.0 lights up in the display.
3In the next 4 seconds, slide your finger up and set
the desired power level.
Switching off the cooking position
Slide your finger down until 0.0 appears. The cooking
position switches off and appears as a detected
cooking position after approx. 4 seconds.
2SWLRQV0HQ

Power level 1.0 = Lowest power
Power level 9.0 = Highest power


K
PLQ



K
PLQ





8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau CX480110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau CX480110 in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info